Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

CONNECT-2

CONNECT-2
Your Customization
CONNECT-2 two monitor stand with beam mounted articulating mounts supported by single central square aluminum vertical aluminum extrusion with monitors fully inwardly swiveled with flag
Connect-2 Dual Monitor Stand

In stock

From $349.83

Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

madein

Connect-2 Dual Monitor Stand

USA ASSEMBLED
Please wait while your content is loading.

REQUIRED ITEMS

Future-Proof Heavy-Duty Dual Monitor Stand

  • Connect-2 is a sturdy, adjustable dual stand for monitors up to 28.5” wide (flat alignment)
  • Max monitor width is approximately 27” when monitors are curved inward
  • Premium components with full range of monitor positioning and orientation
  • Select clamp or thru-desk mounting options
  • Simple and elegant design for effective cable management
  • Modular design allows gradual expansion with full reuse of original components

The CONNECT-2 is a robust, highly adjustable dual monitor stand capable of handling two monitors each weighing up to 30 pounds and measuring 28.5 inches in width. The horizontal beam holding the monitors can be mounted at any height along the sturdy central column. The monitors can be placed anywhere along the beam. The two premium VESA monitor mount mechanisms provide instant landscape/portrait orientation adjustment, as well as substantial swivel and tilt capability. The wire management provides simple and effective cable routing, reducing clutter. Clamp or thru-desk mount options are available.

If you only need two monitors to start with, but think you may later expand to three, four, or even eight screens, the CONNECT-2 is likely the perfect fit for you. The CONNECT system is based on a modular design, allowing you to gradually expand your set-up by adding additional monitors while reusing virtually all of the original components.

Connect-2 Shipping Weights and Dimensions
Static Column 21 lb, 40"x14"x6"
Clamp Mount 7 lb

Mount Type

Dual Monitor Desktop Stand

Number of Monitors

2

Mounting

Through Desk Mount Clamp Mount Rail Mount

Weight Range

up to 30 lbs per monitor

Monitor Horizontal Reach

8.5" mount to monitor in flat setup

Vertical Adjustment

Readjustable along 17" column

VESA Options

75 x 75
100 x 100
Call for additional VESA sizes

Portrait to Landscape

Yes

Max Swivel (at Monitor)

Up to 90° depending on monitor size/tilt

Monitor Tilt Range

+90° up, -45° down

CONNECT-2 DUAL MONITOR ASSEMBLY

CONNECT-2 Specification drawing shows standard dual monitor stand perspective view

Monitors are placed in a side-by-side configuration along a 30 inch beam with two fully articulating monitor mounts called tilter mechanisms, also known as tilter heads.

 

SINGLE-TIER COLUMN PERSPECTIVE AND FRONT VIEWS

CONNECT-2 Specification drawing of standard 17 inch vertical column side and perspective view used for mounting multiple monitors

Static columns are used to mount the horizontal beams. Each beam can be placed anywhere along the column during installation. The single static column is 17 inches in height.

 

SINGLE-TIER SIDE VIEW WITH CLAMP MOUNT AND TILTER

CONNECT-2 Specification drawing illustrates depths of components from side view Connect system

The side view of the single tier configuration with the clamp mount assembly and the tilter mechanism show that the depth of the stand before the monitor is placed is 8.5 inches.

 

DUAL BEAM FRONT VIEW

CONNECT-2 Specification drawing illustrates the maximum width between the dual VESA brackets on a 30 inch Connect beam

In this configuration, the CONNECT-2 can accommodate monitors that each measure up to 28.5 inches wide in landscape orientation.

 

MAXIMUM MONITOR WIDTH - STRAIGHT

CONNECT-2 Specification drawing shows standard dual monitor beam illustrating widest possible screens side by side

The horizontal bar of the highly adjustable CONNECT-2 measures 30 inches across. If both monitors are of equal size, the maximum width of each monitor can be approximately 28.5 inches when they are in a flat configuration.

 

MAXIMUM MONITOR WIDTH WHEN ANGLED

CONNECT-2 Specification drawing shows standard dual monitor stand top view with screens angled maximally inward

When the two monitors for the CONNECT-2 are rotated inward, the maximum width can be as little as 25 up to 27.5 depending on how thick the monitors are. The maximum allowable width is slightly increased when they are displayed flat.

 

100x200mm Flat VESA Plate with Hardware
100x200mm Flat VESA Plate with Hardware

V12

The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.

QTY:
$16.54
Front view of V22 200 x 200 mm VESA adapter plate for large computer monitors and TVs
200x200mm Flat VESA Plate with Hardware

This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.

QTY:
$22.05
Front view of V24 200 x 400 mm VESA adapter plate for very large computer monitors and TVs
200x400mm Flat VESA Plate with Hardware

The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.

QTY:
$27.56
Front view of V46 extra large VESA adapter plate for extra large and heavy computer monitors and TVs
Heavy-Duty Mount Adapter Plate 100x300 to 400x600mm

The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.

QTY:
$71.66
VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

QTY:
$2.10
VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

QTY:
$3.15
  • Are the static columns manually height adjustable?

    Static columns are meant to be set to the desired height of use and left there.

Please wait while your content is loading.