Talk to an ergo expert: (888) 420-3200 or Email Us
Easily and precisely adjust the tilt, swivel and rotation of your LCD monitors. This stand is ideal for multi-user environments where users' needs vary based on their height and work positioning preferences. The LS1512D stand comes standard with 14 inch pole.
Mounting this LCD could not be easier. The standard 4-in-1 mount Kit A allows you to clamp the stand to the back of a desk with as little as 1/4 of an inch of clearance between the desk edge and wall. Configure it to mount in an existing grommet hole or securely fasten it through a single 3/8" hole. Wall mounting capabilities are also included at no additional cost. Some assembly required.
Optional mounts are also available. Interested in purchasing the Cube or Slatwall optional mounts? Just give us a call: 888 420 3200 or 214 742 6066.
This mount can be expanded fit four monitors, with two monitors mounted over two. Check out the LS1512Q Quad Monitor Stand.
|Shipping Weight||16 pounds|
|Shipping Dimensions||32" x 13" x 6"|
|Warranty||5 Year limited|
Pole diameter is 1.1875" (1 and 3/16"). Vertical Travel of Arm Yoke is 10.125". VESA plate center point is at 17.5" in highest vertical position
Top View of the LS1512D showing a total possible farthest distance between monitor centers of 26 inches.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.