Talk to an ergo expert: (888) 420-3200 or Email Us
This heavy-duty dual monitor pole stand frees up space on your worksurface while increasing monitor adjustability with swivel, tilt and portrait to landscape rotation. The LS413D Dual Monitor Stand mounts two LCD screens weighing up to 50 lb with individual adjustment. Set each monitor to the desired height along the pole and rotate with 180° range of motion. Align the monitors together or face them different directions depending on your needs. The cable clip can be positioned anywhere along the pole and keeps wires in check. A monitor mounted to the top of the pole has 360° range of motion.
This mount is also available as the LS413S Monitor Pole Mount, which mounts a single monitor along or at the top of the pole.
|Shipping Weight||14 pounds|
|Shipping Dimensions||17" x 14" x 6"|
|Warranty||5 Year limited|
The monitor mount can be positioned at any point along the vertical pole. Various pole lengths are available. Custom lengths can be ordered but could extend shipping lead time.
The LS413D can have its monitor center about the table surface anywhere from 4.6 inches to 15.25 inches high.
The mounting yoke can be rotated 360 degrees around the pole itself. LS413D pole monitor mount specification drawings of tilter head receiver rotated 90 degrees.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mmVESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.