Talk to an ergo expert: (888) 420-3200 or Email Us
The LS1512Q is a heavy-duty mount that handles four heavy monitors, with two mounted side-by-side over two. Each monitor's tilt, swivel and rotation can be individually adjusted, allowing for exact placement no matter the user's preference. Displays up to 25 inches wide are easily accomodated. The stand is equipped with a 28 inch pole.
The standard 4-in-1 mount Kit A provides a number of modular mounting options, including a clamp which can attach to the back of a desk with as little as 1/4 of an inch of space between the desk edge and the wall. It can also be configured to fit an existing grommet holes as small as 2 inches or through a single 3/8" bolt hole in a surface. Wall mounting is also available.
Optional mounts are also available. Call us with questions at 888 420 3200 or 214 742 6066.
The mount is also available as the LS1512D Dual Monitor Stand, which mounts two monitors side-by-side on a 14-inch pole.
|Shipping Weight||27 pounds|
|Shipping Dimensions||32" x 13" x 6"|
|Warranty||5 Year limited|
Depicted with just one tier of arms, the actual LS1512Q unit always comes equipped with two pole mounted dual yokes that support four articulating arms in a two over two configuration. Pole diameter is 1.1875" (1 and 3/16").
Top View of the LS1512Q shows the maximum width between the two VESA bracket tilter heads. The system allows monitors that are up to 26 inches wide (actual width not diagonal measurement).
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.