Static columns are meant to be set to the desired height of use and left there.
Talk to an ergo expert: (888) 420-3200 or Email Us
The CONNECT-33 is a premium stand is designed to handle six monitors in a dual-tier, three-over-three configuration. Assuming that the monitors are identical in size, the maximum monitor width that can be accommodated is 27 inches. At installation, the two horizontal beams can be positioned at any height on the 33 inch tall central column. The CONNECT's articulating VESA mounts can be secured anywhere along the beams and accept monitors weighing up to 30 pounds each. These tilter mechanisms provide instant landscape/portrait orientation adjustment, as well as full swivel and tilt capability. The expansion beams on the right and left articulate to achieve an arc-shaped design. The simple and elegant wire management system routes the cables along the column and the beams to eliminate clutter. Two options are available for mounting the stand on the work surface: a thru-desk mount or a C-clamp mount.
The CONNECT-33 is just one of many configurations for the CONNECT multiple monitor mounting system. The CONNECT easily scales from a simple 2 monitor set-up to a 4-over-4, eight monitor configuration. Asymmetrical systems are also supported. The modular nature of the design allows going from a relatively modest system to a more complex one over time, by adding expansion components and reusing nearly all the original parts of the mounting system. This rational approach to design makes the CONNECT the ideal choice for professionals that expect their computing needs to evolve over the years.
Connect-33 Shipping Weights and Dimensions | |
Static Column | Box 1: 39 lb, 41"x15"x15", Box 2 & 3: 11 lb, 39"x14"x6" |
Clamp Mount | Adds 7 lb to Box 1 |
|
V12
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
Static columns are meant to be set to the desired height of use and left there.