Static columns are meant to be set to the desired height of use and left there.
Talk to an ergo expert: (888) 420-3200 or Email Us
The impressive CONNECT-44 manages eight monitors in a dual-tier, four-over-four configuration. If the monitors are all equal in size, the stand can accommodate screens with a maximum of 24.67 inches in width and weighing up to 30 pounds each. When being assembled, each of the horizontal beams can be attached at any height along the 33 inch central vertical column. The monitors can be attached anywhere along the horizontal beams and each monitor can be individually swiveled and tilted as well as rotated between landscape and portrait. On each tier, the outer horizontal beams can be tilted inwards to create an arc shape. Wires are kept clean and out of the way by routing the cables along the back of the stand. The stand can be mounted to a surface using either a clamp on the edge or through the desk itself.
The CONNECT-44 is the largest CONNECT offering, but there are many other configurations from anywhere to two to six (in a 3-over-3 set-up) monitors. Due to the modularity of the CONNECT system, a smaller stand could later be reconfigured to a CONNECT-44, or any other larger system, reusing most of the original parts. This ability to expand and adjust in the future is optimal for those with evolving needs.
Connect-44 Shipping Weights and Dimensions | |
Static Column | Box 1: 39 lb, 41"x15"x15", Box 2 & 3: 18 lb, 39"x14"x6" |
Clamp Mount | Adds 7 lb to Box 1 |
|
V12
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
Static columns are meant to be set to the desired height of use and left there.