The DS9109D is a simple yet highly adjustable dual monitor stand. Two monitors are mounted along a sturdy pole that is supported by an integrated stable base - no need for a specific mounting surface.
The DS9109D supports two monitors up to 35 each. The stand can simply be lifted and relocated to another location when required without the need for any disassembly. This versatility makes it ideal for high end monitors, point of sale, point of purchase and touch screens. Minimal initial assembly is required.
This stand is also available as the DS9109S Single Monitor Stand, providing the same versatility with a single monitor attached.
The LS9109D Dual LCD Stand comes standard with a 28 inch tall pole.
Wire Managers give a clean appearance to your work area. Tension knobs hold the tilter mechanisms at the desired height. Base dimensions: 9.5" x 10.5".
The DS9109D Flat Screen Stand can mount two monitors weighing up to 38 pounds each.
The top view of the LCD desk mount base, with dimensions of 9.5" x 10.5".
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.