The DS9109D is a simple yet highly adjustable dual monitor stand. Two monitors are mounted along a sturdy pole that is supported by an integrated stable base - no need for a specific mounting surface.
The DS9109D supports two monitors up to 35 lb each. The stand can simply be lifted and relocated to another location when required without the need for any disassembly. This versatility makes it ideal for high end monitors, point of sale, point of purchase and touch screens. Minimal initial assembly is required.
This stand is also available as the DS9109S Single Monitor Stand, providing the same versatility with a single monitor attached.
The LS9109D Dual LCD Stand comes standard with a 28 inch tall pole. At maximum height, the top monitor can sit 28.425" from the desk surface.
Wire Managers give a clean appearance to your work area. Tension knobs hold the tilter mechanisms at the desired height.
The DS9109D Flat Screen Stand can mount two monitors weighing up to 35 pounds each.
The top view of the LCD desk mount base, with dimensions of 9.5" x 10.5".
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.