Two VESA compatible monitors sit along a 30" beam. The monitor attachment heads can be placed anywhere along this beam, allowing the device to accommodate monitors of equal size up to 28.5" in width in landscape position. This maximum size is reduced to approximately 27" if the monitors are tilted inwards as the bezels will interfere with one another on larger monitors. The cart is supported on a wide base and four heavy-duty casters, providing easy movement even when supporting a substantial weight. Two of these casters lock to keep the unit safely in place when movement is not required. An optional CPU holder sits at the base of the unit. Depending on size, the holder can keep other devices and equipment such as power supplies that need to be moved with the unit. Cable clips are placed along the pole, keeping wires in check and out of the way when the device is moved.
MODULAR AND ADAPTABLE:
Additionally, our heavy-duty monitor carts can be augmented to support a large number of applications. This is because the SERIES-192 mounting pole is compatible with many modular devices.
Please contact Ergomart at 888-420-3200 for more information or to order this product.
|Shipping Weight||Base: 57 lb
Pole: 18 lb
Monitor Mount: 15 lb
|Shipping Dimensions||Base: 25" x 25" x 8"
Pole: 64" x 5" x 5"
Monitor Mount: 32" x 15" x 4"
|Warranty||5 year limited|
The dual monitor cart comes standard with a 5-foot pole. The two monitors are attached to the mounting beam and arranged side-by-side in a flat configuration.
This top view of the rolling monitor cart base illustrates the footprint of the base, which measures 23.7" x 25.0". The outside diameter of the pole fitting is 4.5" and the inside diameter is 1.9" - designed for the installation of a SERIES-192 pole mount.
The monitor cart features four heavy duty casters, measuring 4" in diameter. The top surface of the base is 5.6" off the ground. The ground clearance is at 3.1", which is where the flange and the bottom of the pole are positioned. The total height of the cart is then found by adding 3.1" to the pole length. The flange that accepts the pole is offset towards the back of the 23.7" deep base.
The left image shows the cross-section of the mounting pole with a 1.9" outer and 1.6" inner diameter. The right image shows a side view of the top of the pole, including the top wire access port, its location and size. A minor pole seam is visible through the opening.
The total width of dual monitor beam is 31.5". The tilter heads can be positioned anywhere between 2.3" and 14.2" with respect to the center of the pole. The maximum height for mounting the dual beam while keeping the wire management opening accessible is 39" for a 4' pole, 51" for a 5' pole, and 63" for a 6' pole All measurements are relative to the top surface of the base, which is itself 5.6" off the ground.
The MCART-02 features two highly adjustable tilter heads that can be angled in for a curved viewing experience. If a flat configuration is desired for the MCART-02, each monitor’s maximum width can be approximately 27" wide. If the tilter heard are angled inwards, the maximum allowable width for the monitors may be slightly diminished depending on their thickness and shape. At a 20 degree angle, the maximum width is sitll around 27", assuming the monitors are 2" deep.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.