Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
Talk to an ergo expert: (888) 420-3200 or Email Us
The MKIT-Y is a modular component designed to connect our PM192 poles to all SERIES-118 devices, which includes many of Ergomart's articulating monitor arms. The MKIT-Y slots in to the top of a PM192 pole, allowing the user to attach any compatible SERIES-118 component. With the flexibility and modularity of Ergomart's SERIES-118 mounts, the MKIT-Y can be utilized in many situations to create an ergonomic pole-mounted solution. Combine with an MCART rolling cart pole stand for an easily transportable device, allowing you to place the stand exactly where you need it, when you need it.
The MKIT-Y is available as standard in black. Please contact us for other colors.
NOTE: Do not use the MKIT-Y in configurations where a substantial payload is extended at a considerable distance from the pole unless the stand has been bolted to the floor as the stand may tip.
Ergomart can help you figure out how to best combine our modular products for your needs and discuss any safety concerns: email us at [email protected] or call us at 888 420 3200 for any questions.
Attaches to: PM192 Flange Pole Mount, PM192 Offset Pole Mount, PM192 Center Pole Mount, MCART Rolling Monitor Cart and Mounting Pole
Compatible arm/stand models: SAA Monitor Arms, SA Straight Arms, LS Stands, TRS Monitor & Keyboard Arms and CMD & CMT Dual and Triple Monitor Arms
Shipping Weight | 1.3 lb |
Shipping Dimensions | 8" x 6" x 4" |
Warranty | 5 Year Limited |
Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
No and Yes. Since the tilter head pin is a smaller size than the arm pin, you would not be able to do that without installing an adapter bushing into the mount. Contact Ergomart if you wish to purchase the adapter.
An adapter bushing is required to convert most MKITS from 1.18" receiver openings down to .75" openings suitable for devices with 3/4" diameter pins like the HE35 and the standard tilter head.