The Rolling Monitor Cart Base and Mounting Pole is the first component to building your own easily movable monitor cart. This component includes the sturdy base comprised of four heavy-duty casters, two of which are lockable for keeping the device in place when not in transit. A SERIES-192 pole is also included, with 3 pole length options: 4', 5' and 6'. Custom pole lengths are available, please contact us for more information.
You can attach a large number of devices and components to the pole to design a system suited for your needs. PM Series Direct Mounts will attach directly to the pole without the need for additional hardware. SERIES-118 devices, which include many of Ergomart's articulating monitor arm mounts, can be attached by combining them with an MKIT-E (single mount), MKIT-J (dual mount) or MKIT-Y (pole top mount). With so many options, the Rolling Monitor Cart Base and Mounting Pole can be adapted to suit many uses, including store and lobby displays, educational enviroments and medical facilities. Build a display kiosk, a data entry station, a monitor and keyboard cart for single or multi-monitors and more. Add scanner holders or equipment platforms to accommodate other devices. The Ergomart team is always ready to assist with helping you choose a Rolling Monitor Cart Base and Mounting Pole set-up that works for your requirements, whether it's a modular build or a custom solution: email us at email@example.com or call us at 888 420 3200 with any questions.
The Rolling Monitor Cart Base and Mounting Pole is also available as a component in several pre-build MCART options: the MCART-2 dual-monitor rolling stand and the MCART-3 and MCART-12 triple-monitor rolling stands.
Please note: the Rolling Monitor Cart Base and Mounting Pole only includes the mobile base component and the pole. Other mounting components are sold separately.
Imbalanced loads (where the payload is off-set a distance from the cart) can cause the unit to tip. Please contact us with any questions or concerns regarding weight distribution on the unit.
|Shipping Weight||Base: 57 lb
Pole: 15 lb to 24 lb, depending on pole length
|Shipping Dimensions||Base: 25" x 25" x 8"
Pole: 49 " x 5" x 5" to 76" x 5" x 5", depending on pole length
|Warranty||5 year limited|
This is a front view of the rolling monitor cart base fitted with the 4' monitor mounting pole. The total height of the cart is 51.1 inches.
Front view of the rolling monitor cart base fitted with the 5' monitor mounting pole. The total height of the cart is 63.1 inches.
Front view of the rolling monitor cart base fitted with the 6' monitor mounting pole. The total height of the cart is 75.1 inches.
This image shows a top view of the rolling monitor cart base without the mounting pole. It illustrates the footprint of the base, which measures 23.7" x 25.0". The outside diameter of the pole fitting is 4.5" and the inside diameter is 1.9" - designed to be attached to a SERIES-192 pole mount.
The monitor cart features four heavy duty casters, measuring 4" in diameter. The deck is 5.6" off the ground and the clearance under the base is 3.1". The flange that accepts the pole is offset towards the back of the 23.7" deep base.
The left image shows the cross-section of the pole mount. The right image shows a side view of the top of the pole, highlight the top wire access port, its location and size. A minor pole seam is visible through the opening.
Isometric line drawing of the full unit, illustrating the rolling cart base with four casters and a 4' monitor mounting pole.