Talk to an ergo expert: (888) 420-3200 or Email Us
This version of the SAA4229 provides unmatched reach and flexibility for your Cintiq and most larger touchscreen devices. No other arm rivals the performance of the SAA4229R when it comes to massive vertical travel and workspace-spanning lateral reach. Dip the front desk edge right over the surface edge into your lap or lift it high for perfect standing drawing postures. When you are done with the Tablet, fold the arm up and back and spread out into a wide open work surface area. Never turn a knob or move a lever—simply grasp the tablet with both hands and easily move it to the desired position—let go and the tablet and arm stay precisely where you put them.
The purchasing options on this page provide a great deal of flexibility in configuring your product. Please be aware that Mount Kit A is incompatible with the Heavy-Duty extensions and the 5", 8", and 12" vertical extensions.
Shipping Weight | 29 pounds |
Shipping Dimensions | 28" x 17" x 9" |
Warranty | 5 year limited |
INSTALLING AND ADJUSTING YOUR SAA ARM:
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
|
The purchasing options on this page provide a great deal of flexibility in configuring your product. Please be aware that Mount Kit A and the 2" and 6" Vertical Extensions are not compatible with all components. You may consult the table below to determine the compatibility of various components.
Category | Mount Kits | Vertical Extensions |
Heavy Duty Horizontal Extensions |
||||
Category | Does product below fit into product to the right? |
Mount Kit A |
Mount Kit C |
All Other Mount Kits |
2" 6" |
5" 8" 12" |
4.5", 9.5" and 15.5" |
Monitor Arm | SAA4229R | - | Y | Y | - | Y | Y |
Vertical Extensions |
2" and 6" | Y | Y | Y | Y | Y | Y |
5", 8", and 12" | - | Y | Y | - | Y | Y | |
Heavy Duty Horizontal Extensions |
4.5", 9.5", and 15.5" | - | Y | Y | - | Y | Y |
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
V12
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.