Talk to an ergo expert: (888) 420-3200 or Email Us
The POS9137 comes with a 28" pole and two articulating arms. The top arm is designed to handle a flat touch screen or LCD monitor. The lower arm includes a 8.75"x6.75" platform capable of holding an item such as a credit card input device, printer, or touch pad. The POS9137 comes with a 4-in-1 flex mount kit for most vertical and horizontal mounting applications. This POS pole mount system will handle up to 35 pounds of equipment per arm. These arms can hold POS and display equipment such as scanner printers, keyboards, pin pads, or receipt systems. Height can be reset easily for different users. The POS9137 stand allows for reasonably quick vertical adjustability and superior lateral mobility to better meet the needs of persons who have ADA accessibility requirements.
|Shipping Weight||Minimum 16 pounds|
|Shipping Dimensions||Minimum 32" x 13" x 6"|
|Warranty||3 year limited|
The center of the monitor VESA pattern can be as high a 30" above work surface. The monitor can extend up to 14" from the pole. When set at its lowest position, the top of printer platform can be at about 8.25" from the work surface. The platform size is 8.75"x6.75".
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.