Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

LEVERLIFT-T

Your Customization
LeverLift-CB Independent height adjustment of monitor and keyboard with the low-profile wall-mounted workstations New
LEVERLIFT TOUCH ADJUSTABLE TABLET WALL MOUNT

In stock

From $141.90

Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

Usually ships in 3-7 business days.

madein

Need a mounting option not listed here? Call (888) 420-3200 or visit our

Custom Solutions page.

LEVERLIFT TOUCH ADJUSTABLE TABLET WALL MOUNT

New USA ASSEMBLED
Please wait while your content is loading.

REQUIRED ITEMS

SIMPLE AND QUICK HEIGHT ADJUSTABILITY FOR TABLET OR TOUCHSCREEN

  • Simple sliding mechanism makes setting and resetting monitor height a cinch
  • Low profile slider mounts conform to the ADA space restriction of 4" from the wall
  • Compact slider monitor mounts place the attached device only 1.85" from the wall
  • Available in two colors: black and metallic gray
  • Monitor can be moved along the entire track with no increment restrictions
  • Five available track lengths: 19, 27, 39, 51 and 77 inches
  • Optional wire manager protects, guides and hides cables
  • Custom tablet or monitor attachments can be sourced if necessary

The LeverLift Touch is a simple but dynamic wall mounting system that allows the attached monitor, tablet or touchscreen to be vertically adjusted over the length of the track. There are no pre-set increments, which means that the slider can be adjusted to any height along the track that is appropriate for the end-user, whether sitting or standing, making the LeverLift Touch ideal for multi-user environments.

The sliding mechanism has several options for mounting a 75 x 75 mm, 100 x 100 mm, or 100 x 200 mm VESA compatible monitor:

  • The low profile Monolok mount positions the back of the monitor at 1.85 inches from the wall, which makes it possible to conform to the ADA requirement of having the equipment at no more than 4 inches from the wall. This option provides instant portrait/landscape adjustment capability. Its quick release mechanism ensure ease of installation and removal. The optional secure fastening system adds theft deterrence. All of these features make the Monolok (Low Profile Slider) option perfect for public locations.
  • The fully articulating monitor mount positions the back surface of the monitor at a 4.85 inches from the wall and gives the monitor additional positioning freedom. The monitor can still instantly rotate between landscape and portait. It can also tilt up and down and swivel right to left. For most screens, this range of motion is only limited by the wall.

The track is offered in five different lengths, from 19 to 77 inches, providing a substantial range of height adjustability to satisfy virtually every need.

This versatile wall mount can be attached to a variety of surfaces, such as walls, columns, server and pallet racks, cabinets and other flat vertical objects. The track can be attached to drywall with the provided Snaptoggles, eliminating the need of a backer, and further expanding the mounting possibilities. This flexibility makes the LeverLift Touch suitable for a wide range of applications, including healthcare, public access, secure entry and timeclock stations and many others.

We provide a variety of VESA compliant add-on options for holding and securing tablets or touchscreen monitors and we can source or custom design the perfect housing for your special requirements . The LeverLift Touch is one of a range of LeverLift products. Other options include wire management covers, keyboard tray and fixed CPU mounting components to create full wall-mounted workstations. The LeverLift track mount can also be customized to meet your specific needs, with a wide range of available sliders.

Box 1 (Track) Box 2 (Mount) Box 3 (Wire Manager)
Shipping Weight Up to 5 lb Up to 5 lb Up to 8 lb
Shipping Dimensions Up to 79" x 4" x 4" 16" x 6" x 6" Up to 38" x 8" x 4"
Warranty 5 Year Limited


Mount Type

Vertical Wall Track

Number of Monitors

1

Mounting

Wall Track Mounting

Weight Range

Up to 13 lbs

Monitor Horizontal Reach

2.4" to 4.85"

Vertical Adjustment

Instant independent adjustment of monitor, limited only by track size and installed components

VESA Options

75 x 75
100 x 100
100 x 200

Portrait to Landscape

Yes

Max Swivel (at Monitor)

Up to 180° for articulating mounts
N/A with low profile mounts

Monitor Tilt Range

+90° up, -45° down with articulating mounts
N/A with low profile mounts

Track Lengths

19", 27", 39", 51", 78" standard
Call for custom sizes

TRACKS
MONITOR MOUNTS
WIRE MANAGEMENT
HEIGHT ADJUSTMENT
TRACKS

TRACKS - ROTATED 90 DEGREES

LEVERLIFT-CB wall mounted computer workstation specification drawings showing five track lengths with measurements

This image shows the mounting holes that are pre-drilled into each length of track: 19", 27", 29", 51", and 77". The LeverLift system is intended for vertical use, however, in this figure, the tracks are shown in the horizontal orientation for convenience.

TRACK STOPS

LEVERLIFT-CB wall mounted computer workstation specification drawing of track stops isometric view

The track assemblies come with two end stops: one at the top of the track and one at the bottom. The stops ensure that the sliding mounts do not come off the track while in use. They are secured in place with two set screws after all the sliding mounts have been installed.

MONITOR MOUNTS

LOW PROFILE 75 X 75 MM VESA SLIDER - FRONT VIEW

LEVERLIFT-CB sliding monitor and keyboard tray wall mount specification drawing monitor mount slider with 75mm VESA front view with measurements

This front view of the 75 x 75 mm VESA low profile monitor slider shows that the center of the monitor is 9.97" from the top of the handle, and 11.58" from its bottom. The sliding mount vertical adjustment handle is 5.75" wide and the track measures 2.88" in width. The square VESA plate is shown shaded in gray and is 3.53" in height and width. It can be configured in one of two modes: it can rotate 360°, allowing switching between landscape and portrait orientations or, alternatively, it can be locked in the preferred orientation.

LOW PROFILE 100 X 100 MM VESA SLIDER - FRONT VIEW

LEVERLIFT-CB wall mounted computer workstation specification drawing monitor mount slider with 100mm VESA front view with measurements

This drawing shows the 100 x 100 mm VESA low profile monitor slider as seen from the front. Most of the dimensions are identical to those of the 75 x 75 mm VESA version. The only difference is that the VESA adaptor (in gray) is larger: 4.52" x 4.52". Once again, the VESA plate can be locked or allowed to rotate from landscape to portrait. In the latter case, the resistance to rotation can be adjusted as desired.

LOW PROFILE 100 X 200 MM VESA SLIDER - FRONT VIEW

LEVERLIFT-CB sliding monitor and keyboard tray wall mount specification drawing monitor mount slider with 100x200mm VESA front view with measurements

This front view of the low-profile monitor slider shows the 100 x 200 mm VESA mounting plate in landscape orientation. The VESA adaptor is shown in gray and is 4.52" x 8.45" in size. It can either be allowed to rotate (with adjustable resistance) between landscape and portrait or be locked in the desired position.

LOW PROFILE MONITOR SLIDER - SIDE VIEW

LEVERLIFT-CB wall mounted computer workstation specification drawing monitor mount slider side view with measurements

The low profile monitor mount positions the back of the attached monitor only 1.85" from the wall, ready for instant adjustment up or down the track. The vertical slider is 14" tall and the front edge of the brake release and vertical adjustment handle is at 2.40" from the wall. The vertical travel is only restricted by the length of the track and other attached mounts and devices. The side view above shows the 75 x 75 mm VESA plate, but these measurements are valid for all VESA adaptor sizes on offer.

ARTICULATING MONITOR SLIDER - SIDE VIEW

LEVERLIFT-CB wall mounted computer workstation specification drawing articulating monitor mount slider side view with measurements

The articulating monitor mount allows the attached monitor to tilt, swivel and rotate. As shown in this side view, the back of the monitor is 4.85" from the wall. The front edge of the handle reaches 2.4" from the wall. The vertical slider has a total height of 14". The total amount of instant vertical adjustment is only limited by the length of the track and the size and position of the other components mounted on it.

ARTICULATING MONITOR SLIDER - TILT

LEVERLIFT-CB wall mounted computer workstation specification drawing articulating monitor mount slider side view demonstrating tilt

As shown in this side view, the LeverLift articulating monitor mount can tilt upwards by up to 90° and downward by up to 45°. In most practical cases, the size of the monitor will dictate the limits on positive and negative tilt as it touches the track above or below the mounting point.

ARTICULATING 75/100 MM VESA SLIDER - FRONT VIEW

LEVERLIFT-CB wall mounted computer workstation specification drawing articulating monitor mount slider with 100mm VESA front view with measurements

The 75/100 mm articulating mount accommodates monitors with 75 x 75 mm and 100 x 100 mm hole patterns. The center of the VESA pattern is 10.9" above the vertical adjustment handle. The monitor orientation can instantly adjust from portrait to landscape and back.

ARTICULATING 100 X 200 MM VESA SLIDER - FRONT VIEW

LEVERLIFT-CB wall mounted computer workstation specification drawing articulating monitor mount slider with 100x200mm VESA front view with measurements

The 100 x 200 mm articulating mount is used with larger monitors that have the corresponding hole pattern. It too can accommodate an instant change in the portrait/landscape orientation.

ARTICULATING MONITOR SLIDER - TOP VIEW - SWIVEL

LEVERLIFT-CB wall mounted computer workstation specification drawing articulating monitor mount slider side view demonstrating swivel

This top view illustrates the swivel capability of the articulating mount. The monitor mounting point can rotate along a vertical axis by up to 90° in each direction. In practice, the size of the monitor is often the limiting factor, as the wall will impede the rotation of the monitor before the tilter mechanism does.

 

WIRE MANAGEMENT

WIRE MANAGEMENT COVER - FRONT VIEW

LEVERLIFT-CB sliding monitor and keyboard tray wall mount specification drawing of wire manager front view with measurements

This front view shows the two sizes available for the wire management cover. Both are 8" wide. The smaller wire manager is 24" tall. The larger one is 36" tall. The dashed-line circles near the top and bottom of each wire manager illustrate the wire guidance spools located inside the covers.

 

WIRE MANAGEMENT COVER - TOP VIEW

LEVERLIFT-CB wall mounted computer workstation specification drawing of wire manager side view with measurements

As seen in this top view, the wire management is mounted on the wall along its back surface which is 3.5" wide. The wire manager cover is 1" deep. Inside the cover, two 3" spools located near the top and bottom of the cover guide the cables as the monitor and keyboard mounts are moved up and down. The gap between the spools and the wire manager cover is 0.25".

 

HEIGHT ADJUSTMENT
FOR SEATED USERS ONLY - 1st percentile female to 99th percentile male
DEVICES USED LOW HIGH RANGE TRACK SET TRACK FROM FLOOR XX"
monitor* 39.39" 53.71" 14.3" 39" 30"
touchscreen height* 32" 48" 16" 39" 21"

*Monitor measurement is from center of monitor for reference only. Most users prefer to have monitor slightly lower than centered to eye height. Since vertical placement of attachment hole patterns on the backs of monitors vary, only estimates for positioning can be outlined here. Preference from user to user can vary - track height and track to floor figures are best estimates that should apply in most applications.



FOR STANDING USERS ONLY - 1st percentile female to 99th percentile male
DEVICES USED LOW HIGH RANGE TRACK SET TRACK FROM FLOOR XX"
monitor* 54.09" 70.14" 16.1" 39" 45"
touchscreen height* 45" 66" 21" 39" 36"

*Monitor measurement is from center of monitor for reference only. Most users prefer to have monitor slightly lower than centered to eye height. Since vertical placement of attachment hole patterns on the backs of monitors vary, only estimates for positioning can be outlined here. Preference from user to user can vary - track height and track to floor figures are best estimates that should apply in most applications.



FOR SITTING AND STANDING - 1st percentile female to 99th percentile male
DEVICES USED LOW HIGH RANGE TRACK TRACK TO FLOOR
monitor* 39.39" 70.14" 31" 51" 30"
touchscreen height* 32" 66" 34" 51" 21"

*Monitor measurement is from center of monitor for reference only. Most users prefer to have monitor slightly lower than centered to eye height. Since vertical placement of attachment hole patterns on the backs of monitors vary, only estimates for positioning can be outlined here. Preference from user to user can vary - track height and track to floor figures are best estimates that should apply in most applications.

VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

QTY:
$2.00
VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

QTY:
$3.00
Leave a Review
You're reviewing:LEVERLIFT TOUCH ADJUSTABLE TABLET WALL MOUNT
Start Rating
  • Can I get the thin client on a slider with a brake mechanism?

    Yes we can attach other Ergomart components to the slider brake mechanism that is designed for use with keyboard trays. We can also position the slider handle so that it is above a payload and its attendant means of attachment. Specifically we can affix a small CPU holder or either of the two sizes of thin client holders. Contact Ergomart customer support for assistance and a quotation.

  • Is there a way to lock the monitor from rotating?

    Yes. Ask Ergomart Customer support to add a TLT1 or TLT2 when using an articulating tilter mechanism. The low profile version of the Leverlift comes with a Monolok mechanism which allows the installer to configure with or without the landscape to portrait rotating function.

  • Can I have fixed mounts for the monitor and keyboard like the one the thin client bracket comes on?

    Yes. Please reach out to Ergomart customer support for assistance and we will be happy to provide a solution and quotation with the less expensive fixed mount positioners.

  • How does the wire management component work?

    Please see the image gallery for a close up view of the wire management.

  • How is the height adjusted?

    You simply grab the handle and lift up and outward; the brake is now released and allows you to slide the mount up or down until you release the handle.

  • How smooth is this to adjust? Can I do it one-handed?

    It may be possible to move with one hand but the system is designed specifically for two handed use for safety and ease of use.

  • On the leverlift system, do you offer any monitor mounts where the lever is further down/longer? The reason is that I keep my monitor in portrait position, and I have to spin it to landscape to access the lever.

    At this time there are no longer sliders, however, for orders of quantities greater than 25 units we are able to offer custom solutions. Contact customer service for further assistance with requests of this nature to obtain a quote.

Please wait while your content is loading.