Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

CONNECT-4

CONNECT-4
Your Customization
CONNECT-4 four monitor stand shown with beams oriented in a U shape wrapping monitors around user supported by single central column
Connect-4 Four Monitor Stand

In stock

From $639.22

Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

madein

Connect-4 Four Monitor Stand

USA ASSEMBLED
Please wait while your content is loading.

REQUIRED ITEMS

HEAVY-DUTY, EXPANDABLE QUAD MONITOR STAND

  • Connect-4 is the premier four monitor adjustable stand for monitors up to 24.67” wide (flat alignment)
  • When beams are curved inward 20 degrees max monitor width is approximately 22”
  • Angle the outer horizontal beams inwards to create an arc set-up
  • Precise tilter mechanisms allow for small adjustments for perfect viewing
  • Mount to the desk with either a clamp or thru-desk
  • Easily manage cables throughout the back of the mount
  • Modify, expand and reconfigure with CONNECT's modular components

The sturdy, highly adjustable CONNECT-4 monitor stand supports four monitors side-by-side weighing up to 30 pounds each. Monitors of identical width up to 24.5 inches can be individually tilted, swiveled and rotated from portrait to landscape. The monitors are attached to three connected beams - one central beam 30 inches in length and two side beams of 20 inches. The monitors can be attached anywhere along these beams and the beams themselves are connected by articulating hinges, allowing the monitors to be tilted inwards to create an arc shape. Wires are managed behind the beams via clips and wire guides, giving a clean, uncluttered cabling system. The system can be mounted with a clamp or thru-desk.

The CONNECT line allows for the user to easily modify and adapt the stand if circumstances change. For instance, a second tier of up to four additional monitors can be added with almost none of the original stand needing to be replaced or removed.

Connect-4 Shipping Weights and Dimensions
Static Column 39 lb, 41"x15"x15"
Clamp Mount 7 lb

Mount Type

Quad Monitor Desktop Stand

Number of Monitors

4

Mounting

Through Desk Mount Clamp Mount Rail Mount

Weight Range

up to 30 lbs per monitor

Monitor Horizontal Reach

8.5" mount to monitor in flat setup

Vertical Adjustment

Readjustable along 17" column

VESA Options

75 x 75
100 x 100
Call for additional VESA sizes

Portrait to Landscape

Yes

Max Swivel (at Monitor)

Up to 90° depending on monitor size/tilt

Monitor Tilt Range

+90° up, -45° down

CONNECT-4 QUAD MONITOR HORIZONTAL ASSEMBLY

CONNECT-4 Specification drawing shows standard three beams and four tilter mechanisms monitor stand perspective view

The quad monitor stand consists of three aluminum beams. The middle beam, measuring 30 inches, holds two monitors and the outer beams, measuring 20 inches, hold one monitor each. The beams are connected with hinge mechanisms which allow them to rotate inward and create a curved or envoloping effect. At the time of installation the hinges may be adjustted so that the beams will resist unintended rotation when in use.

 

SINGLE-TIER COLUMN PERSPECTIVE AND FRONT VIEWS

CONNECT-4 Specification drawing of standard double vertical column side and perspective view for mounting multiple monitors

Static columns are used to mount the horizontal beams. The beam can be placed anywhere along the column during installation. The single static column is 17 inches in height.

 

SINGLE-TIER SIDE VIEW WITH CLAMP MOUNT AND TILTER

CONNECT-4 Specification drawing illustrates depths of components from side view Connect system

The side view of the single tier configuration illustrates the depths measurements that are also characteristic of dual tier Connect models.  It shows the depth of the VESA mounting plane in relation to other points.  The 8.5 inches notation specifically refers to the distance between the back edge of a work surface abutting the back of the clamp and the mounting point of the monitor.

 

QUAD BEAM FRONT VIEW

CONNECT-4 Specification drawing illustrates the maximum width between 4 VESA brackets on quad monitor beams

If the beams are placed in a flat or colinear arrangement, the CONNECT-4 is capable of holding four identical monitors of 24.67 inches in width each.

 

MAXIMUM MONITOR WIDTH WHEN COLINEAR

CONNECT-4 Specification drawing shows standard four monitor beam in widest possible screens in a single plane side by side arrangement

A four monitor setup is often used in security and gaming settings. When a curved configuration is not required or impractical, the highly adjustable CONNECT-4’s monitors can be displayed flat in a straight line, enabling each display’s maximum width to be approximately 24.67 inches.

 

MAXIMUM MONITOR WIDTH WHEN CURVED

CONNECT-4 Specification drawing shows four monitor stand top view with screen widths when angled maximally inward

The CONNECT-4 has outer beams that can be angled inward to achieve a curved display effect. If a two inch deep monitor is assumed, the maximum allowable width is approximately 22 inches for each display when the beams are angled 20 degrees inward.  Thinner and thicker monitors as well as shallower or deeper monitor arrangments will effect the maximum monitor width. For wider monitors, extensions are available.  Consult an Ergomart representative to determine if the application is appropriate for extensions. 

 

100x200mm Flat VESA Plate with Hardware
100x200mm Flat VESA Plate with Hardware

V12

The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.

QTY:
$16.54
Front view of V22 200 x 200 mm VESA adapter plate for large computer monitors and TVs
200x200mm Flat VESA Plate with Hardware

This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.

QTY:
$22.05
Front view of V24 200 x 400 mm VESA adapter plate for very large computer monitors and TVs
200x400mm Flat VESA Plate with Hardware

The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.

QTY:
$27.56
Front view of V46 extra large VESA adapter plate for extra large and heavy computer monitors and TVs
Heavy-Duty Mount Adapter Plate 100x300 to 400x600mm

The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.

QTY:
$71.66
VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

QTY:
$2.10
VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

QTY:
$3.15
  • Are the static columns manually height adjustable?

    Static columns are meant to be set to the desired height of use and left there.

Please wait while your content is loading.