Talk to an ergo expert: (888) 420-3200 or Email Us
The purchasing options on this page provide a great deal of flexibility in configuring your product. Please be aware that Mount Kit A is incompatible with the Heavy-Duty Horizontal extensions and the 5”, 8”, and 12” vertical extensions.
Shipping Weight | 15 pounds 24 Pounds with optional MSU4x6 Adapter Bracket |
Shipping Dimensions | 23" x 14" x 4" |
Warranty | 5 year limited |
INSTALLING AND ADJUSTING YOUR SAA ARM:
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
|
The SAA2415 belongs to the SERIES-118 family of products, which offers a great deal of flexibility in configuring your product using a variety of mounting points with optional vertical or horizontal extensions and other accessories. Please be aware that Mount Kit A and the 2" and 6" Vertical Extensions are not compatible with all components. You may consult the table below to determine the compatibility of various components.
Category | Mount Kits | Vertical Extensions |
Heavy Duty Horizontal Extensions |
||||
Category | Does product below fit into product to the right? |
Mount Kit A |
Mount Kit C |
All Other Mount Kits |
2" 6" |
5" 8" 12" |
4.5", 9.5" and 15.5" |
Monitor Arm | SAA2415 | - | Y | Y | - | Y | Y |
Vertical Extensions |
2" and 6" | Y | Y | Y | Y | Y | Y |
5", 8", and 12" | - | Y | Y | - | Y | Y | |
Heavy Duty Horizontal Extensions |
4.5", 9.5", and 15.5" | - | Y | Y | - | Y | Y |
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
The measurements in these drawings are relative to a generic mounting kit into which the arm is installed: the horizontal measurements are relative to the center of the mounting pin, while the vertical measurements are relative to the top of the mounting kit. As you configure your mounting solution, please refer to the specifications of the individual mounting kits to determine the reach and adjustment range within your workspace.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.