Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

TRS2018

TRS2018
Your Customization
TRS2018 height adjustable monitor arm and keyboard tray shown extended from a front isometric view in black MODULAR SERIES-118
TRS2018 Wall/Desk Mounted Monitor and Keyboard Arm

In stock

From $434.04

Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

madein

TRS2018 Wall/Desk Mounted Monitor and Keyboard Arm

USA ASSEMBLED MODULAR SERIES-118
Please wait while your content is loading.

REQUIRED ITEMS

The Compact Monitor Arm with Keyboard Tray Combo for Tight Spaces and Moderate Use

  • Utilize a small space while maintaining versatility
  • 18" of instant vertical travel for monitor and keyboard
  • Handles LCD monitors weighing up to 20 pounds
  • Monitor is vertically adjustable above the tray
  • Sit or stand and comfortably use LCD and keyboard
  • Stow away mouse and keyboard by flipping tray up
  • Keyboard is securely affixed to tray with velcro
  • Keyboard trays with palm rests available
  • Wide trays include mouse holder that captures mouse when tilted
  • Cable management routes wire under arm segments
  • Optional braking system locks arm at any vertical position
  • Optional limiters are set to provide precise vertical range limits
  • Offered in Black and Metallic Gray
  • Easily mounts to desks, walls and poles
  • Please watch our YouTube Video for tips on installing and adjusting the arm component included with this product

Perfect for occasional use in office, medical, technical and light industrial settings, the compact TRS2018 LCD Arm Keyboard Tray Combo facilitates comfortable monitor and keyboard placement when needed, but can be folded into a small footprint when not being utilized. It features a short 3.5" forearm, which makes it ideal for tight spaces. Optional extensions of 4.5", 9.5" or 15.5" can be installed between the mount and the arm to provide additional reach if desired. Position the keyboard and LCD monitor weighing up to 20 pounds over a wide area with 18 inches of vertical travel. The keyboard tray can be configured for solely the keyboard or for both keyboard and mouse. The tray can be tilted to most angles and folded up completely when not in use. The included mouse holder keeps the mouse from falling from the tray when folded. Both the arm and tray rotate 360 degrees and have three points of articulation for precise positioning. Cable management routes wires under both of the major arm components to keep wires clear and tidy. The optional vertical travel limiters and knob-activated brake kit serves two purposes. It can limit the arm's vertical motion to any two points within its range. It can also be used to temporarily lock the arm in place anywhere along the range of travel.

The purchasing options on this page provide a great deal of flexibility in configuring your product. Please be aware that Mount Kit A and the 2" and 6" Vertical Extensions are not compatible with all components.

Shipping Weight 22 pounds
31 pounds (with vertical & horizontal extensions)
Shipping Dimensions 26" tray: 26" x 18" x 12"
Warranty 5 year limited

Black is our quick-ship color.

Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.

MORE THAN 20 MOUNT OPTIONS
INTEGRATES WITH FOUR SYSTEMS

 
COMPLETE MODULARITY BY DESIGN
 
SERIES-118
VIEW ALL SIMILAR MOUNTING DEVICES
 
MOUNT KITS
VIEW COMPATIBLE INSTALLATION OPTIONS
 
EXPLORE
RECENT CUSTOM PROJECTS
 
LEARN
READ THE SERIES-118 REFERENCE GUIDE
 
CONSULT
[email protected]   |   888 420 3200
 
VERSATILE • MODULAR • HEAVY DUTY

ADAPTABLE • FUTURE PROOF
 

 

Mount Type

Monitor and Keyboard Arm

Number of Monitors

1 as is
2 with dual bracket

Mounting

  • Tall Flex C
  • Wall Kit D
  • Dual Wall Kit D3
  • HD Track F
  • Thru Desk G
  • Column Mount K
  • OEM Mount R
  • Slatwall H
  • Pole Mount E
  • Dual Pole Mount J
  • Medical Dovetail S
  • Horizontal Track Slider M
  • Roller Track Positioner M2
  • Wall Mount Roller Trolley N
  • Roller Track Trolley Mount N2
  • Desk Top Roller Trolley Q
  • Ceiling Roller Trolley U

Weight Range

1-20 lb for monitor (with 1 lb for keyboard/mouse)

Monitor Horizontal Reach

20.4" to VESA mounting point

Vertical Adjustment

18" instant and simultaneous adjustment of monitor and keyboard

Horizontal Extensions

4.5", 9.5", 15.5" Heavy duty horizontal
Weight restrictions apply.

VESA Options

75 x 75
100 x 100
100 x 200

Portrait to Landscape

Yes

Max Swivel (at Base)

360°

Max Swivel (at Elbow)

360°

Max Swivel (at Monitor)

Up to 360° based on monitor size/tilt

Monitor Tilt Range

+90° up, -45° down

Keyboard Trays

20" x 8.5" Tray 26" x 8.5" Tray

Keyboard Tray Height Adjustment

18" instant and simultaneous adjustment of monitor and keyboard

Keyboard Tray Tilt Range

+135° up, -80° down

Keyboard Horizontal Reach

33.1"

Monitor Height Relative to Keyboard

VESA plate 6.7 to 13.4" above keyboard

Perspective View
Wall-Mounted High and Low
Positions

TRS2018 compact monitor arm and keyboard tray mount specification drawing wall-mounted isometric view showing highest and lowest positions

The TRS2018 LCD monitor arm with keyboard tray has a total vertical travel range of over 17.5" providing there are no obstructions.

 

Front View
Backbar and Tray Configuration
Options

TRS2018 specification drawing showing tilter mounting points and slider range

The backbar assembly features several options for configuring the relative height of the keyboard and monitor. There are three 1.9” square patterns that can be used to mount the backbar in high, medium and low positions on the tilter head. The rotating VESA plate for the monitor can be set at any point along the 6.7” vertical slot and can be positioned as high as 13.4" and as low as 6.7” from the tray.

 

Front View
Backbar and Tray Configuration
Options

TRS2018 specification drawing showing 75mm attachment mounting positions

There are also two 75 mm hole patterns that can be used to mount the backbar in high or low positions on the tilter head or another 75 mm VESA-compatible device.

 

Side View
Monitor Height Relative to Keyboard Tray and Mounting Location

TRS2018 Specification drawing illustrating measurements for different backbar mount locations

This set of drawings illustrates the three positions available on the backbar for mounting it on the tilter head, shown independently from the rest of the mounting assembly. In all cases, the maximum distance between the center of the monitor’s VESA pattern and the keyboard is 13.4”. The first drawing has the back bar in the high position allowing the monitor VESA plate to be adjusted downward along the entire length of the 6.7” slot. In the other two positions, this range is reduced since part of the slot is blocked due to interference from the tilter head.

 

Side View
Full Extension

TRS2018 Specification drawing showing measurements of the side view with arm extended horizontally

The TRS2018 has a maximum forward reach of 20.4” to the back of the monitor and an additional 12.7” to the front of the 20” or 26”-wide keyboard tray. These measurements are relative to the center of the mounting pin which is compatible with the mounting kits in the SERIES-118 catalog. Please refer to the specific mounting kit measurements you are interested in to find out the geometry in the context of your configuration.

 

Side View
Height Adjustment

TRS2018 Specification drawing of HD keyboard monitor arm in side view showing highest and lowest positions

This side view illustrates the height adjustment of the TRS2018. The arm can 9.0" both up and down relative to the horizontal position. At the top of the range, the back of the monitor extends to 16.7”, at the bottom of the range it extends to 16.6", and the keyboard tray reaches an additional 12.7”. At its highest setting, the center of the VESA plate is at 25” above the mounting point and 13.4” above the tray. Several options for configuring the relative height of the monitor and keyboard tray are described in additional drawings. Note that when desk-mounted, the arm’s downward movement will be limited by the worksurface. The use of a vertical extension restores the full range of movement.

 

Side View
Full Retraction

TRS2018 Specification drawing of HD keyboard monitor arm in side view with arm and tray retracted and folded

This side view illustrates the maximum retraction of the TRS2018, with the arm folded so that the forearm is parallel to the lifting arm. With the tray folded up, the arm extends only 7.9” from the center of the mounting pin. The arm may be further folded by pushing the lifting arm back, depending on the workspace.

 

Top View
20" Standard Keyboard Tray

TRS2018 specification drawing of keyboard monitor arm top view with 20-inch keyboard tray

This partial top view of the TRS2018 shows, from top to bottom, the heavy-duty tilter head, the monitor/keyboard backbar, the sliding VESA adaptor and the 20” folding keyboard tray with the optional palm rest. The distance from the center of the tilter head pin to the front of the VESA plate is 3.4”. The keyboard tray extends 12.7” from the VESA plate. The 1.6” deep optional palm rest adds 0.7” to the overall depth.

 

Top View
26" Standard Keyboard Tray

TRS2018 specification drawing of keyboard monitor arm top view with 26-inch keyboard tray

This top view illustrates a subset of the TRS2018. From top to bottom, the components are the heavy-duty tilter head, the monitor/keyboard backbar, the sliding VESA plate and the folding keyboard tray with the “mouse trap” and the optional palm rest. The distance from the center of the pin used to install the tilter head on the arm to the front of the VESA adaptor is 3.4”. The keyboard tray reaches out 12.7” from the VESA plate. The optional palm rest is 1.6” deep and adds 0.7” of depth to the assembly.

 

VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

QTY:
$2.10
VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

QTY:
$3.15
  • How much vertical travel does this arm have?

    When mounted to a wall or other vertical surface, the arm can achieve its full potential of 18 inches vertical travel. When mounted to a horizontal surface, such as a desk or cabinet top, the surface could impede the lower end of the arm's range. Ergomart offers vertical extensions (see option above) that can raise the entire unit. Using a 6 inch vertical extension will allow the unit to reach full range of motion when mounted to a horizontal surface.

  • Will this LCD monitor arm work if I mount it to the edge of my drafting table?

    No, not if the drafting table's surface is positioned at an angle. This monitor arm MUST be mounted to either a horizontal surface or a vertical surface to function properly.

  • Can I mount this upside down to the ceiling or to the bottom of a surface?

    No, this particular setup cannot be mounted to the ceiling or to the bottom of surfaces. However, Ergomart does have solutions that would work in those situations. Please contact us for options: 888 420 3200 or 214 742 6066 or [email protected].

  • What does the 5 Year Limited Warranty actually cover?

    The warranty is five years from the ship date of the product and covers the arm and data entry system against premature wear and defects. The gas spring cylinder is covered to maintain 95% of its stated maximum load at the time of purchase. Performance in 24/7 environments is warranted at 3 years. Customers pay for shipping of their product back to the factory for repairs. ALL returned products must have a return authorization, which is provided by Ergomart via fax or email.

  • The specifications for the through-desk configuration shows that it only works with surfaces that are thinner than 1.75". My work surface is too thick to use that configuration. Is there another through-desk option for me?

    Please call Ergomart to request a custom bolt that is long enough to fit your needs: 800 420 3200.

  • Is Landscape to Portrait rotation possible with this Arm and Data Entry Combo?

    Absolutely! The height-adjustable slider VESA plate allows for full 360° rotation of the monitor while keeping the keyboard tray stationary. The thumbscrew behind the monitor can be used to adjust the friction-resistance to rotation. Note that the entire diagonal measurement of monitor must be less than 26” to allow it to pivot past the tray flange.

  • Can I mount an Apple iMac or Cinema Display on this combo?

    No, but, we do have other products that handle iMacs and Cinema Displays. You might consider a Heavy Duty TRS2415 Arm and Data Entry Combo to accommodate monitors and iMacs weighing approximately 30 pounds.

Please wait while your content is loading.