Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

TRS2818D

TRS2818D
Your Customization
TRS2818D dual monitor and keyboard tray arm shown in an extended position from a front isometric view in black - badge tile MODULAR SERIES-118
TRS2818D Dual Monitor and Keyboard Arm

In stock

From $740.88

Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

madein

TRS2818D Dual Monitor and Keyboard Arm

USA ASSEMBLED MODULAR SERIES-118
Please wait while your content is loading.

REQUIRED ITEMS

STURDY, HEAVY-DUTY WORKSTATION IS DESIGNED FOR FREQUENT USE

  • Easily adjust the tilt of both monitors and the tray
  • Position the arm where desired for multiple users or sit-to-stand
  • Manages two flat screen monitors up to 12 pounds each
  • Reach out up to 23 inches from the mount to the monitors
  • Up to 18 inches of vertical height adjustment when not restricted
  • Available in Black and Metallic Gray
  • Works with Ergomart's 192 Pole Floor Mounts
  • Choice of 75 x 75mm, 100 x 100mm, or 100 x 200mm VESA monitor supports
  • Wires are kept out of the way below the arm
  • Please watch our YouTube Video for tips on installing and adjusting the arm component included with this product

The TRS2818D mounts two monitors side-by-side above a keyboard tray on a heavy-duty arm. The gas-spring cylinder within the arm is motion-resistant, making it ideal for frequent keying sessions as the arm will resist vertical movement. The monitors and keyboard tray sit a fixed height from each other, but both the monitors and keyboard trays can be tilted for comfort and viewing ease. The arm offers 18 inches of vertical travel, providing movement is not restricted by a mounting surface such as a desk. The arm comes with three tray options: a standard 20-inch wide platform, a 26-inch wide platform and a 27-inch wide metal platform with a palm rest.

MONITOR WEIGHTS

The lifting capacity of the total solution also depends on the tray selected since the 27-inch metal keyboard tray is heavier than the 20-inch and 26-inch trays. In summary, the arm can handle two monitors weighing 2-12 lb each if using the TRS20 or TRS26 tray and 0-12 lb each if using the TRT27 tray.

This workstation is also available as the TRS2818S monitor and keyboard tray arm, which mounts a single monitor.

Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.

Shipping Weight (with Padded Metal Tray)
Shipping Weight (with 20" or 26" Tray)
Box 1: 21 pounds | Box 2: 8 pounds
25 pounds
Shipping Dimensions (with Padded Metal Tray)
Shipping Dimensions (with 20" or 26" Tray)
Box 1: 19" x 17" x 4" | Box 2: 27" x 11" x 2"
26" x 20" x 8"
Warranty 5 year limited
MORE THAN 20 MOUNT OPTIONS
INTEGRATES WITH FOUR SYSTEMS

 
COMPLETE MODULARITY BY DESIGN
 
SERIES-118
VIEW ALL SIMILAR MOUNTING DEVICES
 
MOUNT KITS
VIEW COMPATIBLE INSTALLATION OPTIONS
 
EXPLORE
RECENT CUSTOM PROJECTS
 
LEARN
READ THE SERIES-118 REFERENCE GUIDE
 
CONSULT
[email protected]   |   888 420 3200
 
VERSATILE • MODULAR • HEAVY DUTY

ADAPTABLE • FUTURE PROOF
 

 

Mount Type

Monitor and Keyboard Arm

Number of Monitors

2

Mounting

  • Tall Flex C
  • Wall Kit D
  • Dual Wall Kit D3
  • HD Track F
  • Thru Desk G
  • Column Mount K
  • OEM Mount R
  • Slatwall H
  • Pole Mount E
  • Dual Pole Mount J
  • Medical Dovetail S
  • Horizontal Track Slider M
  • Roller Track Positioner M2
  • Roller Track Trolley Mount N2
  • Desk Top Roller Trolley Q
  • Ceiling Roller Trolley U

Weight Range

0-22 lb per monitor (with 1 lb for keyboard/mouse)

Monitor Horizontal Reach

24" Max to front of tilter

Vertical Adjustment

18" instant and simultaneous adjustment of monitors and keyboard

Horizontal Extensions

Call for information.

VESA Options

75 x 75
100 x 100
100 x 200

Portrait to Landscape

Yes

Max Swivel (at Base)

360°

Max Swivel (at Elbow)

360°

Max Swivel (at Monitor)

360°

Monitor Tilt Range

+90° up, -45° down

Keyboard Trays

20" x 8.5" Tray
26" x 8.5" Tray
27" Padded Metal

Keyboard Tray Height Adjustment

18" instant and simultaneous adjustment of monitors and keyboard

Keyboard Tray Tilt Range

+135° up, -80° down

Keyboard Horizontal Reach

23"

Monitor Height Relative to Keyboard

VESA plate 12.5" above keyboard

DESK MOUNT - LOW POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm side view in low position on through desk mount

Downward movement is restricted by the desk's surface in a desk-mounted configuration. Consider an extension for greater vertical movement.  The tray distance at 8.5 inches above the surface illustrates the main reason this product is typically used for wall situations.

 

DESK MOUNT - MIDDLE POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm side view in middle position on through desk mount

The horizontal position of the arm illustrates the greatest possible reach of the tray at 40 inches as measured from the center of the thru desk mount to the front edge of the tray.

 

DESK MOUNT - HIGH POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm side view in high position on through desk mount

Arm is shown at its highest point without a vertical extension when attached to a horizontal surface.  The tray is 22.5 inches above the surface and the VESA bracket for monitors is at 35 inches.

 

5" EXTENSION - LOW POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm side view in low position with 5 inch vertical extension

Measurements of various dimensions of Desk Mounted TRS2818 with a 5 inch Vertical Extension. Note that the 5" extension allows the arm its full vertical movement without being impeded by the desk surface.

 

5" EXTENSION - HORIZONTAL POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm side view in middle position with 5 inch vertical extension

Measurements of various dimensions of Desk Mounted TRS2818 with a 5 inch Vertical Extension in the middle of its vertical travel.


 

5" EXTENSION - HIGH POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm side view in high position with 5 inch vertical extension

Measurements of various dimensions of Desk Mounted TRS2818 with an 5 inch Vertical Extension with the arm illustrated at its highest position.

 

8" EXTENSION - LOW POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm side view in low position with 8 inch vertical extension

Measurements of various dimensions of Desk Mounted TRS2818 with an 8 inch Vertical Extension. Note that the 8 inch extension will only allow the tray to within 12 inches of the surface.

 

8" EXTENSION - HORIZONTAL POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm side view in middle position with 8 inch vertical extension

Measurements of various dimensions of Desk Mounted TRS2818 with an 8 inch Vertical Extension and the arm positioned in a horizontal position.

 

8" EXTENSION - HIGH POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm side view in high position with 8 inch vertical extension

Measurements of various dimensions of Desk Mounted TRS2818 with an 8" Vertical Extension in its highest position.

 

WALL MOUNT - LOW POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm wall mounted in low position

Measurements of various dimensions of Wall Mounted TRS2818 with a Wall Mount Kit (Mount Kit D) and with the arm in its lowest position.

 

WALL MOUNT - MIDDLE FOLDED POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm wall mounted with tray folded down

Measurements of various dimensions of the wall mounted arm shows how little space it takes up when it is tucked tight against the wall.


 

WALL MOUNT - HIGH POSITION

TRS2818D Specification drawing of long reach keyboard monitor arm wall mounted in high position

Measurements of various dimensions of Desk Mounted TRS2818 installed on an MKIT-D.

 

VESA PLATES

TRS2818D Specification drawing of vesa plates

The TRS2818D has many vesa plate options.

 

VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

QTY:
$2.10
VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

QTY:
$3.15
Please wait while your content is loading.