The Ergomart Sliding Monitor & Keyboard Mount on a Wall Track features a compact, adjustable monitor and keyboard tray mount that is affixed to a heavy-duty rail, ideal for retail, office, medical, technical, and light industrial environments.
Below is a breakdown of the components of the Compact Monitor and Keyboard Mount, highlighting the capabilities, similarities and differences of each component. If you have any questions or require more information, please don’t hesitate to get in touch with an Ergomart representative.
If you are looking for a monitor and keyboard tray with vertical adjustment, try the Wall-Mounted Track with Sliding Data Entry Arm. The monitor and keyboard bracket is attached to a heavy-duty Ergomart monitor arm that provides excellent vertical movement and forward extension.
The Sliding Monitor & Keyboard Mount on a Wall Track is part of an entire family of modular mounts that can be assembled to meet almost any need. Our team at Ergomart is always ready to help you design a system that works for your requirements.
|Box 1 (Monitor/Keyboard Mount)||Box 2 (39-inch Track)||Box 2 (78-inch Track)|
|Shipping Weight||13.9 to 21.3 lbs||14.5 lbs (add 2.4 lb for optional wire manager)||24.2 lbs (add 4.7 lb for optional wire manager)|
|Shipping Dimensions||26" x 18" x 12"||41" x 7" x 7"||80" x 7" x 7"|
|Warranty||5 year limited|
The workstation mount includes a 20 or 26 inch wide keyboard tray that can be folded for easy storage. The backbar supports the VESA monitor and Keyboard. It is attached to an adjustable “tilter head” mechanism which provides full swivel and tilt with the ranges generally only limited by the mounting surface. The VESA bracket rotates for landscape or portrait orientation.
When installed on an MKIT-M2 Roller Track Positioner, the workstation extends at total of 19.6 inches from the mounting surface to the edge of the standard keyboard tray. The MKIT-N2 Sliding Mount subtracts 0.1 inches from this measurement.
When the keyboard tray is folded, its outer surface is at 11.3 inches from the wall with MKIT-M2 and 11.2 inches with MKIT-N2.
The monitor mounting VESA adapter bracket can be adjusted by 6.7 inches along the vertical slot in the back bar, allowing the user to configure the distance between the monitor and keyboard tray.
The monitor/keyboard backbar can be mounted on the tilter mechanism at one of three heights set in 1.9-inch increments. Depending on the mounting position, the vertical range for attaching the VESA monitor mounting plate may be restricted.
The US made aluminum anodized RT Rail is the foundation of the Roller Track system. It can be mounted on the wall, vertical struts, or poles and accepts movable or stationary mounts that support the desired equipment. Each rail includes 2 end caps and 2 stops. The rail is not pre-drilled for fasteners and is designed to be drilled to accommodate on-site installation.
The Roller Track is available in three standard lengths of 39", 78", and 156" and comes in anodized metallic gray as a standard color with anodized black available as an option. It can be cut down after purchase to shorter lengths during installation.
Since the ends of the Roller Track are drilled and tapped, an end that is shortened on-site will require re-tapping or modification to ensure the end stop functions properly.
The J Channel chase is wide and deep enough to contain small power supplies and routers as well as various adapters. The units come without holes so that placement of holes can be determined by the installer; typically corresponding to the studs on either 16" or 24" centers.
This channel length is easily altered in the field during installation with a fine-toothed saw.
The J Channel dimensions are 5.36" x 1.92" and provide an effective cable storage cross section of 4.43" x 1.71".
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.