Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

TRP2718D

TRP2718D
Your Customization
TRP2718D Front isometric view of lifting arm on desk mount with steel left-right sliding tray and dual monitor bracket in black - tile MODULAR SERIES-118
TRP2718D Data Entry Station: Dual Monitor Keyboard Arm

In stock

From $663.51

Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

madein

TRP2718D Data Entry Station: Dual Monitor Keyboard Arm

USA ASSEMBLED MODULAR SERIES-118
Please wait while your content is loading.

REQUIRED ITEMS

OPEN UP DESK SPACE AND IMPROVE WORKSTATION ADJUSTABILITY

  • Arm provides horizontal reach of over 26 inches
  • Compactly folds into just 8.5 inches from the wall
  • 18 inches of vertical travel for sit-to-stand use
  • Handles two monitors up to 6 pounds each
  • Compatible with Ergomart's 192 Pole Floor Mounts
  • Available in Black, Metallic Gray and Matte White
  • Comes standard with 75 x 75mm and 100 x 100mm VESA
  • Optional brake and vertical travel limiter available
  • Please watch our YouTube Video for tips on installing and adjusting the arm component included with this product

With its substantial range of vertical motion of 18 inches and generous tilt, this keyboard tray and arm combo is ideal for many work environments. The TRP2718D frees up workspace and offers sit-to-stand adjustability. It accommodates two displays up to 8 pounds each. Both the arm and the tray can rotate 360 degrees and the monitors and tray can be tilted at different angles. Great wire management allows for cabling to be routed conveniently through the arm just above the mount. The arm can reach out up to over 26 inches but folds away to a mere 8.5 inches from the wall when not in use. The brake and vertical travel limiter option allows for securing of the vertical position and limits on reach so as to not interfere with other workspace equipment.

This workstation is also available as the TRP2718S Monitor and Keyboard Arm that mounts a single monitor up to 18 pounds.

Shipping Weight 35 pounds
Shipping Dimensions 31" x 19" x 9"
Warranty 5 year limited

Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.

MORE THAN 20 MOUNT OPTIONS
INTEGRATES WITH FOUR SYSTEMS

 
COMPLETE MODULARITY BY DESIGN
 
SERIES-118
VIEW ALL SIMILAR MOUNTING DEVICES
 
MOUNT KITS
VIEW COMPATIBLE INSTALLATION OPTIONS
 
LEARN
READ THE SERIES-118 REFERENCE GUIDE
 
CONSULT
[email protected]   |   888 420 3200
 
VERSATILE • MODULAR • HEAVY DUTY

ADAPTABLE • FUTURE PROOF
 

 

Mount Type

Monitor and Keyboard Arm

Number of Monitors

2

Mounting

  • Tall Flex C
  • Wall Kit D
  • HD Track F
  • Thru Desk G
  • Column Mount K
  • OEM Mount R
  • Slatwall H
  • Pole Mount E
  • Dual Pole Mount J
  • Medical Dovetail S
  • Horizontal Track Slider M
  • Wall Mount Roller Trolley N
  • Desk Top Roller Troller Q
  • Celiing Roller Trolley U

Weight Range

Up to 8 lb per monitor (with 1 lb for keyboard/mouse)

Monitor Horizontal Reach

26" to front of backbar

Vertical Adjustment

18" instant and simultaneous adjustment of monitors and keyboard

VESA Options

75 x 75
100 x 100

Portrait to Landscape

Yes

Max Swivel (at Base)

360°

Max Swivel (at Elbow)

360°

Max Swivel (at Monitor)

Up to 360° based on monitor size/tilt

Monitor Tilt Range

+90° up, -45° down

Keyboard Trays

Left/Right Gliding Keyboard Tray

Keyboard Tray Height Adjustment

18" instant and simultaneous adjustment of monitors and keyboard

Keyboard Tray Tilt Range

+135° up, -80° down

Keyboard Horizontal Reach

39.6"

Monitor Height Relative to Keyboard

see drawings

Perspective View
TRP2718D

TRP2718D workstation and monitor keyboard arm isometric view specification drawing

The TRP2718D shown in its highest position with the ADJ1430 dual monitor bracket. Each side of the keyboard tray has a handle that can be pulled outward, allowing for the mouse platform to be placed to either the left or right of the keyboard platform.

 

Front View
Backbar Mounting Locations

TRP2718D specification drawing showing tilter mounting points

The backbar assembly features several options for configuring the relative height of the keyboard and monitor. There are three 1.9” square patterns that can be used to mount the backbar in high, medium and low positions on the tilter head. Most installations work best with the tilter attached to the lowest point on the backbar. This is the preferred position because it reduces the stress on the tilter head component. It will also allow for the most vertical travel before the keyboard tray stops when it rests on the surface when desk-mounted.

 

Front View
Bracket Mounting Locations

TRP2718D specification drawing showing monitor bracket mounting locations

There are two 75 mm VESA-compatible mounting locations for the dual monitor bracket, allowing the monitors to be placed at 11.2" or 13.1" from the keyboard tray.

 

Side View
Monitor Height Relative to Keyboard Tray and Mounting Location

TRP2718D Specification drawing illustrating measurements for different backbar mount locations

This set of drawings illustrates the three positions available on the backbar for mounting it on the tilter head, shown independently from the rest of the mounting assembly. These three positions allow the user to select the relative height of the workstation with respect to the mounting point. Note that in all three illustrations, the dual monitor bracket is in the high position, placing the monitors 13.1" above the keyboard tray.

 

Side View
Full Extension

TRP2718D Specification drawing showing measurements of the side view with arm extended horizontally

The TRP2718D has a maximum forward reach of 26” from the center of the arm's mounting pin to the front surface of the backbar. The distance to the front of the VESA plate will vary, depending on the mounting bracket used and the position of the monitors along the horizontal slots in the backbar. The the front of the keyboard tray extends an additional 13.6” from the backbar. These measurements are relative to the center of the mounting pin which is compatible with the mounting kits in the SERIES-118 catalog. Please refer to the specific mounting kit measurements you are interested in to find out the geometry in the context of your configuration.

 

Side View
Height Adjustment

TRP2718D Specification drawing of HD keyboard monitor arm in side view showing highest and lowest positions

This side view illustrates the height adjustment of the TRP2718D with the tilter attached to the lowest position and the dual bracket in the high position, placing the monitors 13.1" above the keyboard platform. The arm provides 18" of total height adjustment and can move 8.8" up and 9.2" down relative to the horizontal position. At the top of the range, the front surface of the backbar extends to 22.5”, while at the bottom of the range it extends to 22.1". The keyboard tray reaches an additional 13.6”. At its highest setting, the center of the dual monitor bracket is at 21.6” above the top surface of the SERIES-118 mount kit. Several options for configuring the relative height of the monitor and keyboard tray are described in additional drawings. Note that when desk-mounted, the arm’s downward movement will be limited by the worksurface. The use of a vertical extension restores the full range of movement.

 

Side View
Full Retraction

TRP2718D Specification drawing of HD keyboard monitor arm in side view with arm and tray retracted and folded

This side view illustrates the maximum retraction of the TRP2718D, with the arm folded so that the forearm is parallel to the lifting arm. Velcro can be used to attach a keyboard to the tray, thereby allowing the user to stow the tray vertically, freeing up space and reducing clutter. With the tray folded up, the arm extends only 8.4” from the center of the mounting pin. The arm may be further folded by pushing the lifting arm back, depending on the workspace.

 

Top View
TRP2718D

TRP2718D specification drawing of keyboard monitor arm top view

This partial top view of the TRP2718D shows, from top to bottom, the heavy-duty tilter head, the monitor/keyboard backbar, the ADJ1430 dual monitor bracket and the folding keyboard tray with the mouse platform pulled out to the right. The distance from the center of the tilter head pin to the front of the top portion of the backbar is 3”. The keyboard tray with handle extends 13.5” from the top portion of the backbar.

 

Front View
ADJ1430 Dual Monitor Bracket

TRP2718D specification drawing front view of the ADJ1430 dual monitor bracket

Front view of the ADJ1430 showing the dual 31" wide dual bracket. The central portion of the bracket has a 75 mm by 75 mm VESA hole pattern used to attach to the backbar. The horizontal slots are 8" long accommodating monitors up to 30" wide.

 

Top View
ADJ1430 Dual Monitor Bracket

TRP2718D specification drawing top view of the ADJ1430 dual monitor bracket

The bracket slopes forward starting three inches from the center at 3.1° on each side putting each end on a plane 0.9" in front of the center mounting area, as illustrated in the drawing.

 

Front View
ADJ1523 Dual Monitor Bracket

TRP2718D specification drawing front view of the ADJ1523 dual monitor bracket

Front view of the ADJ1523 showing the dual 24" wide dual bracket. The central portion of the bracket has a 75 mm by 75 mm VESA hole pattern used to attach to the backbar. The horizontal slots are 5.5" long accommodating monitors up to approximately 23" wide.

 

Top View
ADJ1523 Dual Monitor Bracket

TRP2718D specification drawing top view of the ADJ1523 dual monitor bracket

The bracket slopes forward starting three inches from the center at 3.1° on each side putting each end on a plane 0.7" in front of the center mounting area, as illustrated in the drawing.

 

Front View
VESA Plate Options

TRP2718D specification drawing of VESA mounting options

The TRP2718D has multiple VESA interface options for each dual monitor bracket.

 

VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

QTY:
$2.10
VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

QTY:
$3.15
Please wait while your content is loading.