MKIT-N2 is a mounting kit for Ergomart’s horizontally installed heavy-duty Roller Track (RT) wall track. It is designed to provide easy, instant lateral mobility to a large variety of arms, poles and other mounting equipment that support monitors, TVs, monitor/keyboard workstations, CPUs, printers and other computing and display devices. This heavy-duty mount kit is based on a 11.5”-wide trolley with 18 sturdy roller bearings. It is capable of moving heavy loads quietly along the length of the RT rail with virtually no resistance for many years of trouble-free use.
As with all other “MKIT” mounts, the MKIT-N2 is a modular building block that is part of the SERIES-118 family of mounts. It allows virtually all SERIES-118 devices to be attached to the RT rail. These devices comprise a large variety of mounting options providing unmatched adjustability (instant reach and/or height adjustability, articulation, viewing angles) and configurability (multi-monitor, extended horizontal and vertical reach, weight ranges). They are also compatible with a number of VESA accessories such as monitor handles, scanner holders and other brackets.
The MKIT-N2 comes with an optional brake component. It can be immobilized at the desired location with the turn of ratcheting brake knob to prevent unintended movement.
MKIT-N2 is the updated version of our MKIT-N, which is nearing its end-of-life. Both mount kits have the same functionality, with the same weight rating of 100 lb. The only added feature is the position brake. The MKIT-N2 is available in Black or Gray.
Note that the MKIT-N2 is the only product sold on this page. Please browse the SERIES-118 catalog to complete your design. Weight ratings for a particular complete mounting setup depend on several factors, including the mounting infrastructure, all mounting devices that are part of the solution, and the usage scenario or application. Please contact us at [email protected] or 888 420-3200 for assistance.
|Shipping Weight||5.4 to 6.0 pounds|
|Shipping Dimensions||15" x 11" x 6"|
|Warranty||5 Year Limited|
The monitor mount is shown attached to the Roller Track horizontal track, sold separately.
The front view drawing illustrates the mount is 11.5 inches in width and 3.9 inches in height at its largest point.
With the optional brake attachment, the width of the mount increases 1 inch to 12.5 inches. The brake can be placed on either side of the mount.
The mount extends 4.49 inches from the wall at its widest point and the center of the mount receiver is 3.39 inches from the back of the mounting surface.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.