Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
Talk to an ergo expert: (888) 420-3200 or Email Us
This versatile mounting kit can be configured for desk clamp, thru-desk, wall mount, reverse wall mount, grommet hole, and side bolt applications. It features a smaller, integrated foot plate compared to other mounts of its type and has an optional cable management attachment to keep work areas neat and organized. This mount kit is compatible with SAA7000, SAA2010, SAA2045, SAA179 arms and all LS series stands.
Shipping Weight | 2.2 pounds |
Shipping Dimensions | 9" x 6" x 5" |
Warranty | 5 year limited |
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
No and Yes. Since the tilter head pin is a smaller size than the arm pin, you would not be able to do that without installing an adapter bushing into the mount. Contact Ergomart if you wish to purchase the adapter.