Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
Talk to an ergo expert: (888) 420-3200 or Email Us
- GSA
- Help & About
-
- Contact Us
MONDAY - THURSDAY: 8:00 AM - 6:00 PM CST FRIDAY: 8:00 AM - 5:30 PM CST
Phone - Toll Free: 888-420 3200 Phone - Outside US: +1 (214) 742-6066 Se Habla Español: Extensión 231 Contact us for secure fax ordering
- Contact Us
-
- Custom Solutions
SKU
MKIT-K
This thru desk mount has no base, which gives the mount an attractive low profile.
The column mounts to surfaces using a bolt and a rectangular washer.
Standard 2.5” bolt attaches to surfaces up to 1.75” thick.
Have a thicker work surface? Order an optional 3.5” bolt to attach to surfaces up to 2.75” thick or an 4.5” bolt to attach to surfaces up to 3.75” thick.
Compatible arm models: SAA7000, SAA2010, SAA2045, SAA179, SAA2718, SAA2415, SAA4228, SAA4229.
200x200mm Flat VESA Plate with Hardware
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
QTY:
$20.00
200x400mm Flat VESA Plate with Hardware
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
QTY:
$25.00
VESA 1/4-inch Spacer Kit
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
QTY:
$2.00
VESA 1/2-inch Spacer Kit
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
QTY:
$3.00
Overall Rating
Leave a Review
Leave a Review
-
Will your mount kits work with 3rd party arms?
-
Is there a way that I remove my arm and just put the tilter head in to the mount kit?
No and Yes. Since the tilter head pin is a smaller size than the arm pin, you would not be able to do that without installing an adapter bushing into the mount. Contact Ergomart if you wish to purchase the adapter.
-
I'm not adding much weight , but wanted a thru-desk style. Do I need this or the Mkit-G?
Both would be good options. Mkit-K works fine especially when the surface material is strong or thicker than 1.25 inches. Contact an Ergomart representative to discuss your application.
-
What is the benefit of this over a MKit-G?
It has a lower cost and is as strong as the MKIT G when attached to sturdy surfaces. Many customers like the small 2" diameter footprint.
-
Does the capacity of this mount differ from the Kit-G because it doesn't have a base?
Both MKIT-K and MKIT-G are capable of handling all payloads below 65 pounds when connected to a sturdy and immovable substructure. Adding extensions and substructure composition and thickness can create conditions that make one product suitable over another. Please reach out to Ergomart for assistance in determining the best solution for your application.
More Products You Might Find Interesting
