Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
Talk to an ergo expert: (888) 420-3200 or Email Us
This thru desk mount has no base, which gives the mount an attractive low profile.
The column mounts to surfaces using a bolt and a rectangular washer.
Standard 2.5” bolt attaches to surfaces up to 1.75” thick.
Have a thicker work surface? Call to order an optional 3.5” bolt to attach to surfaces up to 2.75” thick or an 4.5” bolt to attach to surfaces up to 3.75” thick.
Compatible arm models: SAA7000,
SAA2010,
SAA2045,
SAA179,
SAA2718,
SAA2415,
SAA4229.
The MKIT-K with the standard 2.5" bolt length can fit on surfaces from 1.03 to 1.77 inches. Larger surfaces can be accommodated with longer bolts - contact Ergomart to order.
Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
No and Yes. Since the tilter head pin is a smaller size than the arm pin, you would not be able to do that without installing an adapter bushing into the mount. Contact Ergomart if you wish to purchase the adapter.
Both would be good options. Mkit-K works fine especially when the surface material is strong or thicker than 1.25 inches. Contact an Ergomart representative to discuss your application.
It has a lower cost and is as strong as the MKIT G when attached to sturdy surfaces. Many customers like the small 2" diameter footprint.
Both MKIT-K and MKIT-G are capable of handling all payloads below 65 pounds when connected to a sturdy and immovable substructure. Adding extensions and substructure composition and thickness can create conditions that make one product suitable over another. Please reach out to Ergomart for assistance in determining the best solution for your application.