The LeverLift Articulating Monitor Mount is one of many modular components that are compatible with the LeverLift Wall Track (also called M-Track). These mounting devices can be mixed and matched to create a wall-mounted workstation that promotes usability and comfort. Each of these mounts can be positioned anywhere along the wall-mounted vertical track. Most, including this versatile monitor mount, can be adjusted by lifting its lever and then simply raising or lowering it to the desired height. The height adjustability is only limited by the length of the track and the other attached LeverLift components.
This slider mount is the most adjustable and flexible of the LeverLift monitor mounts. It can tilt, swivel and rotate the attached monitor, touchscreen or tablet. You can tilt the monitor upwards up to 90° and downward up to 45° and swivel it both left and right by 90°, although the range of motion is often restricted by the wall surface obstructing the edges of the monitor. The monitor can also rotate a full 360°, making landscape to portrait movement simple. The front edge of this mount extends to 4.85" from the wall mounting surface. The mount holds monitors, tablets and touchscreens up to 12 pounds.
If you are looking for a more compact monitor mount, the low profile monitor slider mount sits only 2.4" from the wall.
|Shipping Weight||Up to 5 lb|
|Shipping Dimensions||Up to 16" x 6" x 6"|
|Warranty||5 year limited|
The articulating monitor mount allows the attached monitor to tilt, swivel and rotate. As shown in this side view, the back of the monitor is 4.85" from the wall. The front edge of the handle reaches 2.4" from the wall. The vertical slider has a total height of 14". The total amount of instant vertical adjustment is only limited by the length of the track and the size and position of the other components mounted on it.
As shown in this side view, the LeverLift articulating monitor mount can tilt upwards by up to 90° and downward by up to 45°. In most practical cases, the size of the monitor will dictate the limits on positive and negative tilt as it touches the track above or below the mounting point.
The 75/100 mm articulating mount accommodates monitors with 75 x 75 mm and 100 x 100 mm hole patterns. The center of the VESA pattern is 10.9" above the vertical adjustment handle. The monitor orientation can instantly adjust from portrait to landscape and back.
The 100 x 200 mm articulating mount is used with larger monitors that have the corresponding hole pattern. It too can accommodate an instant change in the portrait/landscape orientation.
This top view illustrates the swivel capability of the articulating mount. The monitor mounting point can rotate along a vertical axis by up to 90° in each direction. In practice, the size of the monitor is often the limiting factor, as the wall will impede the rotation of the monitor before the tilter mechanism does.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.