Talk to an ergo expert: (888) 420-3200 or Email Us
Ergomart's mobile triple monitor cart is a heavy-duty, sturdy unit that can support the substantial weight of three monitors while still providing easy movement of the entire device. Its large informational display area makes it ideal for many applications, including lobbies and storefronts, education environments and medical facilities such as operating rooms and other patient care environment monitoring.
Each of the monitors is attached via a VESA compatible tilter head that provides individual tilt, swivel and rotation movement. The monitor attachments can be placed anywhere along the three-part articulating beam. If placed at the edges, the beam can accommodate three equally-sized monitors of 27" in width. The two outside monitors can be curved inwards for an arc-like formation, providing their size allows it. The maximum size is approximately 24" in width for the arc formation with equal sized monitors with bezel depths of 2".
At the base sits four heavy-duty casters which provide easy movement even when the largest monitors are attached. An easy-to-grip, flexible handle located under the monitors facilitates this movement. When the unit is stationary, two of the casters lock to keep the device stable and in place. An optional power supply or CPU holder can be attached just above the compact base, providing a compartment for additional equipment to be easily moved with the rest of the unit. Cables and wires are kept close to the pole via cable clips attached at various locations.
Please contact Ergomart at 888-420-3200 for more information or to order this product.
If a flat configuration is desired for the MCART-03, each monitor’s maximum width can be approximately 27 inches wide.
The MCART-03 has outer beams that can be angled in for a curved viewing experience. In this case, the maximum allowable width for the monitors is slightly diminished from when they are flat. At a 20 degree angle, the maximum width can be around 24 inches, assuming the monitors are two inches deep.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.