Ergomart's mobile triple monitor cart is a heavy-duty, sturdy unit that can support the substantial weight of three monitors while still providing easy movement of the entire device. Its large informational display area makes it ideal for many applications, including lobbies and storefronts, education environments and medical facilities such as operating rooms and other patient care environment monitoring.
Each of the monitors is attached via a VESA-compatible Tilter Head that provides individual tilt, swivel and rotation movement. The monitor attachments can be placed anywhere along the three-part articulating beam. If placed at the edges, the beam can accommodate three equally-sized monitors of 27" in width. The two outside monitors can be curved inwards for an arc-like formation, providing their size allows it. The maximum size is approximately 24" in width for the arc formation with equal sized monitors with bezel depths of 2".
At the base sits four heavy-duty casters which provide easy movement even when the largest monitors are attached. An easy-to-grip, flexible handle located under the monitors facilitates this movement. When the unit is stationary, two of the casters lock to keep the device stable and in place. Cables and wires are kept close to the pole via cable clips attached at various locations.
MODULAR AND ADAPTABLE:
Our heavy-duty monitor carts can be augmented to support a large number of applications. This is because the SERIES-192 mounting pole available on all MCARTs is compatible with many modular devices.
Please contact Ergomart at email@example.com or 888-420-3200 for more information or to order this product.
|Shipping Weight||Base: 57 lb; Pole: 18 lb; Monitor Mount: 19 lb|
|Shipping Dimensions||Base: 25" x 25" x 25"; Pole: 64 " x 5" x 5"; Monitor Mount: 32" x 15" x 8"|
|Warranty||5 year limited|
The triple monitor cart comes standard with a 5-foot pole. The three monitors are attached to the three section articulating mounting beam and arranged side-by-side in a flat configuration.
This top view of the rolling monitor cart base illustrates the footprint of the base, which measures 23.7" x 25.0". The outside diameter of the pole fitting is 4.5" and the inside diameter is 1.9" - designed for the installation of a SERIES-192 pole mount.
The monitor cart features four heavy duty casters, measuring 4" in diameter. The top surface of the base is 5.6" off the ground. The ground clearance is at 3.1", which is where the flange and the bottom of the pole are positioned. The total height of the cart is then found by adding 3.1" to the pole length. The flange that accepts the pole is offset towards the back of the 23.7" deep base.
The left image shows the crossection of the mounting pole with a 1.9" outer and 1.6" inner diameter. The right image shows a side view of the top of the pole, including the top wire access port, its location and size. A minor pole seam is visible through the opening.
The total maximum width of the MCART-03 with the beams extended is 57". The central beam measures 30", whereas the left and right beams each provide 9.5" of effective length. The outer tilter heads can be positioned anywhere between 18.7" and 26.5" with respect to the center of the pole. The maximum height for mounting the triple beam while keeping the wire management opening accessible is 39" for a 4' pole, 51" for a 5' pole, and 63" for a 6' pole. All measurements are relative to the top surface of the base, which is itself 5.6" off the ground.
The MCART-03 has outer beams that can be angled in for a curved viewing experience. The tilter mechanisms cam also swivel. In a flat configuration, each monitor’s maximum width can be approximately 27" wide. If the lateral beams are angled, the maximum allowable width for the monitors is slightly diminished. At a 24 degree beam angle, the maximum width can be around 24", assuming the monitors are 2" deep.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.