Talk to an ergo expert: (888) 420-3200 or Email Us
The Envoy-2 dual monitor arms mount two 2.2 to 19.8-pound monitors on separate hyper-flexible ergonomic arms. Each arm has three articulation points, offering varying degrees of rotation. The middle articulation point provides over 13 inches of easy vertical travel. Cables are routed along the underside of the arm, maintaining the clean, sleek design and keeping the wires from hampering movement. Adjusting the arm is easy, accomplished by simply holding the monitor and moving it to the desired position. Each attached monitor can also be tilted, rotated and swivelled for optimal positioning. The Envoy-2 is compatible with monitors featuring 75 mm or 100 mm VESA hole patterns. The VESA plate has a quick release mechanism, which it means the monitor can be detached and replaced quickly, reducing installation time. The monitor arms attach to the work surface at a single point, either clamped to the desk edge or bolted through the desk.
The Envoy-2 is also available as the Envoy, a single monitor arm that offers the same great features and affordable price.
Please note the Envoy-2 is a stand-alone product that is not compatible with other Ergomart mounts and accessories. Please see Ergomart's full range of multi-monitor arms for a selection of adaptable, versatile arms for dual monitor set-ups.
|Shipping Weight||17.06 pounds|
|Shipping Dimensions||22.50" x 18.50" x 4.63"|
|Warranty||10 year limited|
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.