Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

LS9137S

LS9137S
Your Customization
LS9137S articulating monitor mount in black with ghosted monitor shown from an isometric view. MODULAR SERIES-118
LS9137S Adjustable Monitor Stand

In stock

From $145.32

Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

madein

LS9137S Adjustable Monitor Stand

USA ASSEMBLED MODULAR SERIES-118
Please wait while your content is loading.

REQUIRED ITEMS

OPTIMIZE WORKSPACE WHILE INCREASING MONITOR ADJUSTABILITY

  • Premium triple articulating arm for flexible positioning of a touch screen monitor

  • Monitors reach out from mounting point up to 13.5 inches

  • Use as a desk stand or integrate into any application (industrial, hospitality, medical, OEM equipment)

  • This highly adaptable stand is a SERIES-118 modular mounting device

  • Compatible with all SERIES-118 mount kits, enabling countless applications

    • Install on any horizontal or vertical surface: desk, workbench, wall, cabinet, cube, pole

    • Move laterally along wall with our Roller Track system of horizontal sliding mounts

    • Position above an open floor on an existing or Ergomart PM192 ceiling mounted pole

    • Mount on special medical or other OEM equipment using T-slot, Dovetail and OEM mounts

  • The user instantly and intuitively rotates from landscape to portrait

  • Holds its position under finger-tip pressure

  • Effortlessly tilt and swivel your monitor to the most comfortable angle

  • Easy to adjust yet holds position firmly once repositioned

  • Designed for VESA 75, 100, 100 x 200 and 200 x 200 VESA hole configurations

  • Compact: LCD arms fold to a depth of less than 4 inches

  • Adaptable: Over 90° backward tilt & more than 44° forward tilt


Adjustability:

The LS9137S single monitor stand positions a flat screen monitor or VESA compliant device weighing as much as 35 lb. It provides generous tilt and pan as well as portrait/landscape rotation. It comes with a 14” pole but several optional lengths are available. Height can be easily reset for different users by removing the monitor and adjusting the arm assembly to the desired height.

Applications:

The LS9137S is a SERIES-118 mounting device, compatible with our entire selection of SERIES-118 mount kits (known as MKITs). As such, it offers virtually unlimited possibilities for mounting.

  • Horizontal and Vertical Surfaces: The LS9137S mounts to just about any vertical or horizontal surface. It does so in multiple ways: desk clamp, through desk, wall, horizontal or vertical wall track, heavy duty pole, slatwall, cabinet, to name a few.

  • Medical, OEM equipment and cabinets:  LS9137S works with the OEM mount, which can be installed on almost any vertical surface including the walls of a cabinet or specialized equipment.  The LS9137S can also be used in medical applications using our Dovetail and T-Slot Mounts. Call us for details.

  • Applications With Secure Poles: In some applications the  LS9137S’s SERIES-118 pole is inserted into a “through-hole” of a mount kit such as the repositionable MKIT-M and the sliding MKIT-N for the Roller Track or the single MKIT-E and the dual MKIT-J for PM192 poles. The secure mounting pole (P118RS) has the features to accomplish this safely.

  • Roller Track: With our Sliding Horizontal Mount System, the monitor can be positioned above or below the track on either a MKIT-M or MKIT-N

 

LS9137S horizontal track monitor mount in isometric view with monitors positioned high
LS9137S horizontal track monitor with sliding mount in isometric view with monitors positioned low

 

  • Overhead mounting:  For workspaces with open floor plans, the monitors can be placed overhead, utilizing a ceiling mounted pole (either pre-existing or Ergomart’s PM192) and an MKIT-E or MKIT-J for one-sided, or two-sided mounting.

LS9137S monitor mounted overhead with ceiling-mounted pole seen from isometric view with monitor angled down
LS9137S horizontal track monitor mount in isometric view with two monitors back to back

 

  • Custom mounts may also be available depending on the application. If you do not see your desired mounting kit in the drop down menu please call us at 888 420 3200 to order an optional mount. Recessed VESA mounting patterns may require an optional Spacer Kit; see bottom of page 2 of instructions.

Want to mount a second monitor along the pole? Check out the LS9137D Dual Monitor Stand.



Shipping Weight 8 pounds
Shipping Dimensions 17" x 14" x 6"
Warranty 5 Year limited
MORE THAN 20 MOUNT OPTIONS
INTEGRATES WITH FOUR SYSTEMS

 
COMPLETE MODULARITY BY DESIGN
 
SERIES-118
VIEW ALL SIMILAR MOUNTING DEVICES
 
MOUNT KITS
VIEW COMPATIBLE INSTALLATION OPTIONS
 
EXPLORE
RECENT CUSTOM PROJECTS
 
LEARN
READ THE SERIES-118 REFERENCE GUIDE
 
CONSULT
[email protected]   |   888 420 3200
 
VERSATILE • MODULAR • HEAVY DUTY

ADAPTABLE • FUTURE PROOF
 

 

Mount Type

Pole Stand

Number of Monitors

1

Mounting

  • Flex Kit A
  • Tall Flex C
  • Wall Kit D
  • Dual Wall Kit D3
  • Pole Mount E
  • HD Track F
  • Thru Desk G
  • Slatwall H
  • Dual Pole Mount J
  • Column Mount K
  • Offset Surface Mount K2
  • Horizontal Track Slider M
  • Roller Track Positioner M2
  • Roller Track Trolley Mount N2
  • Compact Flex Mount P
  • Desktop Roller Trolley Q
  • OEM Mount R
  • Medical Dovetail S
  • Ceiling Roller Trolley U

Weight Range

Up to 35 lb

Monitor Horizontal Reach

13.03" from center of mounting pin to front of VESA plate

Vertical Adjustment

Readjustable along 14" pole

Horizontal Extensions

Call for information.

VESA Options

75 x 75
100 x 100
100 x 200
200 x 200

Portrait to Landscape

Yes

Max Swivel (at Base)

360°

Max Swivel (at Elbow)

360°

Max Swivel (at Monitor)

Up to 360° depending on monitor size/tilt

Monitor Tilt Range

+90° up, -45° down

LS9137S - EXTENDED

LS9137S monitor arm stand specification drawing top view with arm extended fully with measurements

The LS9137S can extend 13.03 inches from the midpoint of the mounting point of the arm to the front of the tilter head.

 

LS9137S - ROTATION AT TILTER HEAD

LS9137S monitor arm stand specification drawing top view with arm extended fully and tilter head rotated 90 degrees with measurements

The LS9137S can rotate the monitor at the tilterhead about 180 degrees in relation to the forearm on which it rests.  When the monitor is tilted up so that it clears the forearm the display can then actually rotate 360 degrees if unencumbered by cables and wiring.

 

LS9137S - ROTATION AT ELBOW JOINT

LS9137S monitor arm stand specification drawing top view with arm folded with measurements

The LS9137S can rotate the monitor at the tilterhead at the central point of articulation 360 degrees if wires are not present.

 

LS9137S - SIDE VIEW

LS9137S monitor arm stand specification drawing side view with arms at highest position with measurements

The drawing above depicts the stand with the standard 14 inch high pole. Optional 20, 24 and 28 inch poles are also available. Maximum and minimum possible heights of the monitor arm is dependent on the length of pole, the depth of the receiver component of the mount kit and interference from the mounting surface. Specific mount kit depths can be found in the specification drawings of each mount kit product page.

 

100x200mm Flat VESA Plate with Hardware
100x200mm Flat VESA Plate with Hardware

V12

The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.

QTY:
$16.54
Front view of V22 200 x 200 mm VESA adapter plate for large computer monitors and TVs
200x200mm Flat VESA Plate with Hardware

This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.

QTY:
$22.05
Front view of V24 200 x 400 mm VESA adapter plate for very large computer monitors and TVs
200x400mm Flat VESA Plate with Hardware

The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.

QTY:
$27.56
Front view of V46 extra large VESA adapter plate for extra large and heavy computer monitors and TVs
Heavy-Duty Mount Adapter Plate 100x300 to 400x600mm

The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.

QTY:
$71.66
VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

QTY:
$2.10
VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

QTY:
$3.15
  • Does the extension have any kind of wire management, or will my cords dangle from the monitor to the pole?

    Yes, the arm has a wire management clip to easily access and secure your wires.

  • Can a thin client holder or anything else be attached to this pole as well?

    Yes, other mounts and arms that are not pictured can be attached to this pole. For more assistance regarding product you don't see available on this page please contact customer service with the specifics of your request for further assistance.

Please wait while your content is loading.