Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

MKIT-D

MKIT-D
$46.57
Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

madein

Mounting Kit D: Heavy Duty Wall Mount

USA ASSEMBLED MODULAR SERIES-118

REQUIRED ITEMS

  • Mounting Kit D is a heavy-duty wall mount
  • Mount option: wall mount for demanding use
  • Long monitor arm? Weighty load? Use this heavy-duty wall mount
  • Black, metallic gray and matte white are standard colors for this mount
  • Please call for custom color options - lead times may apply

Mount Kit D is a Heavy-Duty Wall Mount that allows even the longest of Ergomart's heavy-duty monitor arms to manage heavy loads.

Compatible arms: SAA7000, SAA2010, SAA2045, SAA179, SAA2718, SAA2415, SAA4229, CMD2018, CMD2415, CMT2415.

Call Ergomart with your questions when selecting the appropriate mount.

WORKS WITH SERIES-118 DEVICES
 

COMPLETE MODULARITY BY DESIGN
 
SERIES-118
VIEW COMPATIBLE ARMS & OTHER DEVICES
 
MOUNT KITS
VIEW ALL SIMILAR MOUNT KIT OPTIONS
 
LEARN
READ THE SERIES-118 REFERENCE GUIDE
 
CONSULT
[email protected]   |   888 420 3200
 
VERSATILE • MODULAR • HEAVY DUTY

ADAPTABLE • FUTURE PROOF
 

 

MOUNT KIT D

HEAVY-DUTY WALL MOUNT

KIT D
ISOMETRIC VIEW

 

MKIT-D wall mount specification drawing isometric view

 

KIT D
FRONT VIEW

 

MKIT-D wall mount specification drawing front view with measurements

 

KIT D
SIDE VIEW

 

MKIT-D wall mount specification drawing side view with measurements

 

KIT D
TOP VIEW

 

MKIT-D wall mount specification drawing top view with measurements

 

MKIT-D accepts two fasteners up to .35 inches in diameter. There is a very slight counter bore feature that surrounds the fastener holes and creates a space for washers. It is 1.02 inches in diameter and about .075 inches deep.

  • Will your mount kits work with 3rd party arms?

    Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.

  • Is there a way that I remove my arm and just put the tilter head in to the mount kit?

    No and Yes. Since the tilter head pin is a smaller size than the arm pin, you would not be able to do that without installing an adapter bushing into the mount. Contact Ergomart if you wish to purchase the adapter.

  • What is the screw size for these? Toggle bolt or screws better?

    The openings are greater than .37 inches - they can accommodate 3/8", 5/16" and 1/4" bolts and screws. Toggle bolts should NEVER be used in sheet rock unless it has been suitably prepared with thick plywood backer secured to the studs.

  • Does the Wall Mount Kit D come with hardware?

    No, hardware is not included due to the wide variety of possible surface materials (wood, metal, concrete, etc.) or the thickness of the wall. Different wall surfaces require different types of fastening systems. Work with a professional installer or contact Ergomart for assistance with the correct hardware for the application.

  • Can I install this using toggle bolts?

    It is dependent on the application, payload and the support device that is attached to the mount. If the MKIT-D is attached to a wall using 5/16 screw toggle kits (rated at over 200 pounds of pullout) with 3/4 inch plywood backer properly secured to studs, then arms with less than 25 inches of reach and payloads less than 25 pounds will be appropriate.

  • Why order the MOUNT KIT D Heavy Duty Wall mount over the wall mount configured Flexible mounts? How do I choose?

    While the wall mount configured Flexible Mounting Kits work well with most arms and light to moderate payloads, the longer more heavy duty arms often perform better with Heavy Duty Wall Mount Kit D. Kit D provides a stronger mounting base which allows for heavier loads and reduces wobble and vibrations. Stability and reduced vibration are important when the arms have keyboard trays and the user keys at the end of the arm.

Please wait while your content is loading.