Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

MKIT-G

MKIT-G
$46.02
Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

madein

Mounting Kit G: Heavy Duty Thru Desk Mounting Kit

USA ASSEMBLED MODULAR SERIES-118

REQUIRED ITEMS

  • MKIT-G supports heavy loads and long reach arms
  • Optional longer bolts available - call to order
  • A simple solution for mounting our arms to surfaces
  • Black, metallic gray and white are standard colors
  • Accepts all SAA, SA and EQP arms and extensions
  • Compatible with all lengths of VE vertical extensions
  • Please call for custom color options

The Heavy-Duty Thru Desk mount uses a bolt and a rectangular washer to secure it to a work surface.
The standard 2.5 inch bolt allows the mount to clamp on to surfaces up to 1.1 inch thick.
Thicker work surface? Order an optional 3.5 inch bolt to attach to surfaces up to 2.1 inches thick or a 4.5 inch bolt to clamp to surfaces up to 3.1 inches thick.

 

Compatible arm models: SAA7000, SAA2010, SAA2045, SAA179, SAA2718, SAA2415, SAA4229, CMD2018, CMD2415, CMT2415.

WORKS WITH SERIES-118 DEVICES
 

COMPLETE MODULARITY BY DESIGN
 
SERIES-118
VIEW COMPATIBLE ARMS & OTHER DEVICES
 
MOUNT KITS
VIEW ALL SIMILAR MOUNT KIT OPTIONS
 
LEARN
READ THE SERIES-118 REFERENCE GUIDE
 
CONSULT
[email protected]   |   888 420 3200
 
VERSATILE • MODULAR • HEAVY DUTY

ADAPTABLE • FUTURE PROOF
 

 

MOUNT KIT G

HEAVY-DUTY THROUGH-DESK MOUNTING KIT

KIT G
PERSPECTIVE VIEW

MKIT-G through-desk mount specification drawing isometric view

 

KIT G
MIN AND MAX CONFIGURATION

MKIT-G through-desk mount specification drawing front view with measurements

 

KIT G
TOP VIEW

MKIT-G through-desk mount specification drawing top view with measurements

 

The MKIT-G with the standard 2.5" bolt length can fit on surfaces from 0.38 to 1.12 inches. Larger surfaces can be accommodated with longer bolts - contact Ergomart to order.

  • Will your mount kits work with 3rd party arms?

    Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.

  • Is there a way that I remove my arm and just put the tilter head in to the mount kit?

    No and Yes. Since the tilter head pin is a smaller size than the arm pin, you would not be able to do that without installing an adapter bushing into the mount. Contact Ergomart if you wish to purchase the adapter.

  • Does this come with a template so I know how to drill into my desk?

    No, however there is only one .375 inch hole that needs to be drilled, so all you need to do is drill the hole to where you want the center of the mount to be.

  • What is the largest size hole in my desk that a Mount Kit G (or any thru desk mount) will work with?

    The 3” rectangular washer is specifically designed for use with a 3/8” bolt and nut supplied with the mount kit. The clearance hole would typically be between .375” and .5” in diameter. The rectangular washer is not for use with clearance holes larger than 1.25” in diameter. For installation where an existing round hole is between 1.25” and 2.24” in diameter contact Ergomart for assistance. Grommet holes larger than 2.25” will accommodate Mount kit C in a clamp configuration.

Please wait while your content is loading.