Hyper-adjustable dual monitor mount with two triple-articulated arms placed along our SERIES-118 pole
LS9137D is part of the SERIES-118 modular system and can adapt to any work environment
The SERIES-118 pole fits in all mount kits in the system, thereby enabling countless applications
Adapts to our Roller Track system that allows effortless, instant horizontal repositioning
Installs overhead using an existing pole or an Ergomart PM192 ceiling mounted pole
Each monitor reaches out 13.5 inches from pole
Holds its position if utilized with touch screen monitors under light pressure
Effortless swivel and rotation for both monitors separately
Over 90° backward tilt and more than 44° forward tilt
Works with 75mm, 100mm, 100 x 200mm and 200 x 200mm VESA patterns
Compatible with many Ergomart accessories, including our Universal Barcode Scanner Bracket
Each monitor arm can be retracted to less than 4 inches in depth
The LS9137D Dual monitor mount comes standard with a 28 inch pole and will handle two LCD monitors weighing up to 35 pounds each. Most monitors as large as 30" are well matched for use with the LS9137D stand. Please refer to the specifications drawings for more information. Each monitor can be mounted where desired along the pole. They can be separately tilted, swiveled and rotated as needed.
The LS9137D is part of the SERIES-118 mounting system and works with all SERIES-118 mount kits (known as MKITs). These kits enable virtually unlimited possibilities for adapting to your workspace, furniture, and equipment.
Horizontal and Vertical Mounting: There are multiple options for most vertical or horizontal surfaces: clamps for a desk edge, through desk or grommet mounts, wall mounts with or without a horizontal or vertical track, heavy duty floor mounted or floor-standing poles, slatwall, cabinets, to name a few.
Medical, OEM equipment and cabinets: The universal OEM mount allows for installation on vertical surfaces such as the walls of a cabinet or specialized equipment. The LS413D can also be used in healthcare applications using our Dovetail and T-Slot Mounts found on medical equipment and facilities. Call us for details.
Applications With Secure Poles: In some cases, the SERIES-118 pole is inserted into a “through-hole” of a mount kit such as the movable and sliding Roller Track kits (MKIT-M and MKIT-N, respectively) or the PM192 single and dual pole mounts (MKIT-E and MKIT-J). The secure mounting pole (P118RS) has the features to accomplish this safely.
Roller Track: The Sliding Horizontal Mount System allows monitors to be moved along the track. The two monitors can be positioned in a variety of ways with respect to the track, since there is complete flexibility in deciding on the relative height of the pole with respect to the MKIT and the location and orientation of each articulating arm.
Ceiling mounting: Overhead mounting is sometimes required to “drop” monitors into a workspace with an open floor plan. This can be accomplished by using a single or dual monitor mount to attach the LS9137D to a ceiling mounted pole. We recommend the PM192 heavy duty pole system but you may be able to use a pre-existing pole. Please contact us for assistance.
Custom mounts may also be available depending on the application. If you do not see your desired mounting kit in the drop down menu please call us at 888 420 3200 to order an optional mount.
Although there are many available mounting options on this page, additional mounts are available from Ergomart. If you do not see your desired mounting kit, please call us at 888 420 3200 to order. Recessed VESA mounting patterns may require an optional Spacer Kit. Please refer to the bottom of page 2 of the instructions.
Get the same mount capabilities for just a single monitor with the LS9137S Single Monitor Stand.
|Shipping Weight||14 pounds|
|Shipping Dimensions||32" x 13" x 6"|
|Warranty||5 Year limited|
The LS9137D extends about 13" from the center of the mounting point to the front of the tilter head.
The LS9137D can rotate the monitor at the tilterhead about 180 degrees in relation to the forearm on which it rests. When the monitor is tilted up so that it clears the forearm the display can rotate 360 degrees if unencumbered by cables and wiring.
The LS9137D can rotate at the center (elbow) point of articulation 360 degrees if wires are not present.
The drawing above depicts the stand with the standard 28 inch high pole. Optional 20 and 24-inch lengths are also available. Maximum and minimum possible heights of the monitor arms are dependent on the length of pole, the depth of the receiver component of the mount kit and interference from the mounting surface. Specific mount kit depths can be found in the specification drawings of each mount kit product page.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.