Yes, however the monitor should be removed prior to loosening the thumb screw of the shaft collar that holds the mount in position.
Talk to an ergo expert: (888) 420-3200 or Email Us
Simple and nicely adjustable. The LS413S LED and LCD stand is a sturdy and attractive way to free up workspace while providing instant left – right swivel, up – down tilt, and portrait to landscape rotation. This group of features are simply not offered with factory stands. With over 180° of rotation at the pole and 360° rotation at the top of the pole, the LS413S is a great multi-user monitor stand. The monitor rotates 360° making portrait to landscape transitions virtually effortless. Set the monitor at the desired height along the pole. The cable management clip can be positioned at any point along the pole to control cabling discreetly.
The LS413S monitor stand can rotate 360° when moved to the top of the pole. Ergomart will custom cut the standard 14" tall steel pole to your specified length to provide full rotation at your desired monitor height. Call us if you have questions or need customizations for the LS413S.
If you require two monitors mounted along the pole, this mount is also available as the LS413D dual monitor stand.
Shipping Weight | 8 pounds |
Shipping Dimensions | 17" x 14" x 6" |
Warranty | 5 Year limited |
|
V12
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
Yes, however the monitor should be removed prior to loosening the thumb screw of the shaft collar that holds the mount in position.