Talk to an ergo expert: (888) 420-3200 or Email Us
Our COMBO 2 Data Entry System is a true Sit-Stand LCD and Keyboard Track Wall Mounted Solution that can be configured for ADA compliance. The superior adjustability provided by this system may help solve reflected light issues, reduce headaches and vision problems and alleviate back, neck, and shoulder pain associated with poor equipment positioning and body posture. The modular components can be specified for current uses and then redeployed and adapted for equipment upgrades and changes. Sit or Stand, our Heavy Duty Wall Track COMBO 2 offers great flexibility and adaptability.
The COMBO 2 System has six major elements:
In its base configuration, the COMBO 2 has two articulating arms with more than 15.5 inches of vertical travel. The monitor arm offers instant left-right swivel, quick landscape-portrait rotation, and simple tilt adjustability. The keyboard tray articulates and folds up when not in use. The cable management covers can be configured to provide a custom clean look. A CPU or thin client holder can be added above or below the work station. With the CPU placed above the monitor, the recommended minimum track length is 31 inches.
YES, WE CAN HELP YOU BUILD YOUR CUSTOM SET-UP:
If the options available in COMBO 2 meet your needs, simply make your selection using the drop down menus above and click "Add To Cart" to price and purchase it. If you need a custom solution, our expert staff is here to assist you. You may:
|Shipping Weight||Varies depending on products ordered|
|Shipping Dimensions||Varies depending on products ordered|
|Warranty||5 year limited|
Please call us to get a firm commitment for a ship date. This product normally ships in 3 to 5 days from our central distribution point in North Texas.
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
A 39 inch vertical track is componentized with the standard arms and an optional CPU holder. CPU holders come in a variety of sizes. Arms offset 16.75 inches in their lowest and highest positions along the wall behind the track.
The monitor arm extends away from the wall approximately 22.5 inches when in its lowest and highest extremes but reaches its maximal distance of 26 inches when it is perfectly horizontal.
Here the arm is extended out to its furthest position with 8.5 inch deep keyboard tray front at just over 36 inches from the wall.
Seen from above the arm is shown at its approximate maximal extension of 26 inches. The widest part of the lifting arm is about 1.38 inches thick.
Shown folded back near the wall, the arm protrudes 3.63 inches. The final distance from a wall in the folded position is determined by the computer monitor.
In the extended side position, the SAA7000 LCD Monitor Arm reaches out to the far left or right side 16.75 inches when the arm is fully lowered or raised.
With the COMBO2 Extended Reach 7000 series LCD Arms, our TRS 20" and 26" Keyboard Trays (that are both 8.5 inches deep) extend an ample 34.75 inches.
With both the 20" and 26" Phenolic Keyboard platforms, when the SAA7000 keyboard tray arm is folded in upon itself the front of the tray extends out only 13.5 inches from the mounting surface.
Arm folded to left side of wall track with EGT keyboard tray in upright folded position. In this extreme position, the keyboard is 6.5 inches from the wall or mounting source. Note that the arm, when folded, is flush with the wall track mount.
A wide range of keyboard trays are available with the COMBO2. Shown here is an 8.5 inch deep TRS type Keyboard Tray.
Here the COMBO2 is shown with the Premium NPE Soft Tray, unlike other trays, this unique tray is encapsulated in a soft foam rubber.
Here the COMBO2 is shown with the Deluxe Left Right Moving Mouse Keyboard Tray aka the Banana Board. The Banana Board allows the user to easily choose either left or right mouse placement. It extends as much as 39.25 inches from the wall.
When the SAA7000 with the 26 x 8.5 inch Keyboard Tray is maximally extended, the front edge of the keyboard tray reaches out 34.75 inches from the mounting surface.
The SAA7000 with NPE Premium Keyboard Tray extends as far out as 38.25 inches from the wall in the middle position.
It is in the middle position that the SAA7000 arm and Deluxe Left Right Moving Mouse Keyboard Tray extend the farthest: a full 39.25 inches.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.